Jagal Group is a leading Nigerian conglomerate with operations in the Oil&Gas, Construction and
Manufacturing industries. The company has been growing successfully over the past 40 years, and has become a valuable and respected contributor to the development of the country’s economy.
Position: Digger (Helper)
Purpose/Role:
Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of digging materials.
Key aims and objectives:
Digs out a site layout, exercising care not to dig too deep into wood or other cables lines
Prime Responsibilities and Duties:
Operate jackhammers or drills to break up concrete or pavement.
Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Clean or prepare construction sites to eliminate possible hazards.
Dig ditches or trenches, backfill excavations, or compact and level earth to specifications, using picks, shovels, pneumatic tampers, or rakes.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Other Duties:
Performs other related duties as required.
The Persons:
Ability to work within a team.
Ability to cope with a heavy workload
Ability to carry out physical tasks.
Have a flexible approach to working hours (i.e. weekends).
Have the ability to work with minimal supervision.
Postion: Fuel Attendant / Bowser Driver
Purpose/Role:
The principal responsibility of the Fuel Attendant is fill tanks of mobile equipment / Plant on site.
Key aims and objectives:
Dispense Fuel to Mobile Plants / Equipment.
Prime Responsibilities and Duties:
Run fuel pumps.
Supply them a voucher for required volume of fuel to be collected for each day.
Receive the applied fuel into the main tanks.
Fill fuel tanks of equipment with diesel to particular levels.
Collate sub-vouchers, take meter readings on volume received and plant hour meter reading at the point of receiving the diesel.
Develop the record to determine the actual volume dispensed for the day/week and month.
Prepare records to be entered in a worksheet.
Other Duties:
Performs other related duties as required.
The Persons:
Must possess minimum of a trade test with 5 years industrial work experience.
Good driving skills.
Trade Test Certifications from any recognized and accredited post-secondary institution.
Must have knowledge of water distribution and waste water disposal in commercial, residential and industrial buildings
Must possess good oral and written communication skill.
Must always be ready to work whenever needed, even under pressure.
Position: Project Material Controller
Purpose/Role:
Management and co-ordination of all OFON 2 Project Material control requirements
Key aims and objectives:
Material Status reconsolidations for all disciplines and identify gaps.
To address gaps and implement effective materials controls systems and process in materials flow and equipment packages on OFON 2 Project
Coordinates with QA/QC to ensure effective finalisation of Material Receiving Report
Liaise with Engineering /Project management teams to identify shortages /omitted materials particularly piping and E/I materials Arrange for delivery, assembly, or distribution of supplies or parts to expedite flow of materials in order to meet production schedules.
To enhance existing UID traceability and inspection procedure
Organizes and maintains warehouse and inventory yard areas for efficient material storage and handling, including labelling, stocking and organizing stock items on shelving.
Maintain files, such as packing lists, MRR, bills of lading.
Contribute to the identification of opportunities for continuous improvement of materials control systems, processes and practices taking into account ‘international best practice’, improvement of business processes, cost reduction and productivity improvement.
Ensure that all relevant HSE policies, procedures , instructions and controls are adhered to so that the safety of employees, quality of products/services and environmental compliance is guaranteed
Ensure the safe passage and timely delivery of requested materials to work site areas
Conducts lessons learnt on materials control on the project
Prime Responsibilities and Duties:
Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and timely manner.
To ensure prompt availability and effective allocation of materials to Fabrication and Erection work sites.
Set up inventory systems to identify and reconcile all materials procured
Other Duties:
Development and mentoring of local content Materials personnel
Attend to any other reasonable request or work task as allocated by the Line Manager or other Senior Management
Initiate improvement strategy on materials control and storage
The Person:
+ 15 Years of experience in materials controls, ware house and logistics management
Industry knowledge is preferred
High level of Integrity
Attention to detail
Management of Material Resources – Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work.
Good analytical thinking skills and using logic to address work-related issues/problems
Knowledge of PC and Microsoft office applications
Good verbal and written Communication skills
Good knowledge in the implementation of policies & procedures
Good planning, organizing, and integration skills
Effective Time Management
Good team Work skills
Adaptability and flexibility
Creativity and alternative thinking to develop new ideas for and answers to work-related problems.
Active listening skills
Position: Mechanic
Purpose/Role:
To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. Other minor duties may be assigned and may vary by location.
Key aims and objectives:
The basic function of the Mechanic is to install, troubleshoot, clean, inspect, and maintain mechanical equipment throughout the facility in a safe and professional manner. Maintenance Mechanic experience in heavy industry or power plant strongly preferred.
Prime Responsibilities and Duties:
Monitors and maintains facility equipment to ensure safe and efficient equipment and facility operation.
Performs preventive and repair maintenance procedures safely and professionally with minimal supervision in accordance with Company Work Rules, Policies and Procedures.
Initiates and completes work-orders and requisitions, and documents all critical and or pertinent information on a routine basis.
Responds and reports to work during off hours when emergency repairs are required.
Takes proactive measures to address improvement opportunities.
Assumes increased levels of responsibility when required or requested. Performs lesser skilled duties when required or requested.
Complete the Corporate and Plant Training Programs within the time frame prescribed.
Identifies and effectively uses basic and precision measuring tools to calculate and determine lengths, surface areas, and volumes as necessary while performing maintenance tasks on a routine basis.
Follows standard safety procedures, correct safety and environmental hazards, and report them to the Shift Supervisor immediately. Reads, understands, and applies information such as lock out/tag out procedures, safety rules, job hazard analyses, operating and maintenance instructions, and procedure manuals.
Works overtime if requested.
Communicates clearly and concisely both verbally and in writing; as well as communicate clearly whether using in-situ intercom system, two-way radio or face to face.
Anticipates typical problems identify potential or recurring problems, and takes appropriate action.
Other Duties:
Periodically inspect equipment and locate / correct problems before breakdown occurs.
Advise management on whether continued operation of equipment could be hazardous.
When breakdown occur, repairs as quickly as possible in order to minimize operation downtime.
Participate in proactive safety programs including Hazard Observation program; UC/UA.
The Persons:
Technical knowledge and skills sufficient to complete required job functions.
3 years’ experience in required field (minimum).
Physically fit
Must possess communication skills both oral and written
High school graduate
Position: Compressor Mechanic
Purpose/Role:
To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. Other minor duties may be assigned and may vary by location.
Key aims and objectives:
The basic function of the Compress Mechanic is to be responsible for the maintenance, upkeep and any repairs to all compressors.
Prime Responsibilities and Duties:
Keep a daily log on all compressor maintenance performed.
Ensure there is a planned maintenance system in place on all compressors
General maintenance on all hardware for high-pressure equipment
Assist the Air Gun Mechanic with maintenance and repairs as needed
Assist the departments with maintenance and repairs as needed
Keep all compressor areas clean and neat at all times
Inspect all compressors on a regular basis for any oil leaks
Coordinate all compressor activity
Keep an adequate supply inventory available for any needed repairs
Perform general housekeeping to maintain a clean living environment
Participate in all emergency drills and safety meetings
Wear all necessary personal protective equipment as required
Review and become familiar with Company Policies pertaining to safety
Adhere to the Company Policy on drugs and alcohol
Other Duties:
Perform all maintenance and service on compressed air systems and related equipment
Self-disciplined and able to work without direct supervision
Provide outstanding customer service
Excellent communication and problem solving skills
Be fully capable of preparing all work orders, time sheets and reports accurately, neatly and timely.
The Persons:
A great work ethic
A strong electrical / plumbing mechanical aptitude
2-3 years of solid field experience involving installations, PM and repair of equipment
Refrigeration certification a plus
Must provide own mechanics tools
Computer Skills, Windows familiar
Technical knowledge and skills sufficient to complete required job functions.
Physically fit
Must possess communication skills both oral and written
High school graduate
Position: Auto Electrician – Mechanical
Purpose/Role:
To carry out routine electrical works including vehicle preparation and the fitting of electronics equipment to standard.
Key aims and objectives:
Repairs and overhauls electrical systems in automotive vehicles, such as car, buses, and truck and equipment. Install, maintain, identify faults, and repair electrical wiring and computer based equipment in vehicles and equipment
Prime Responsibilities and Duties:
Determines malfunction of electrical system by visual inspection of vehicle / equipment and coordinate to workshop and site in‐charge on day to day activities.
Familiar with adjusting ignition timing and measures and adjusts distributor breaker‐point gaps.
Repairs or replaces defective wiring in ignition, lighting, air‐conditioning, and safety control systems, can fill‐up, control and update the maintenance records on daily basis
Install electrical equipment such as gauges, lighting, alternators, and starter motors in cars, and install electrically operated accessories.
Familiar to test instruments and read circuit diagrams to find electrical faults, adjust engine control systems and timing to make sure vehicles are running at peak performance.
Knows to test, recondition, and replace faulty alternators, generators, starter motors, and related items such as voltage regulators and batteries, and repair or replace faulty ignition systems, electrical wiring, fuses, lamps, and switches.
Good in rewinding motors and electronic wirings.
Other Duties:
Complies with the highest level of safety at workshop and site to avoid any type of accidents.
The Persons:
Minimum of (5) years’ work experience as Auto Electrician for all types of equipment and vehicle both in workshop and on sites.
Able to work well within a team based environment.
Good driving Skills
“Can do” attitude to work.
Strong commitment to the Nigerdock ethics policies.
Knowledge of the tools, equipment, and materials common to the electrical trade.
Knowledge of applicable electrical codes, standards, and regulations.
Skill in the installation, repair and maintenance of all types of electrical system equipment and components.
Skill in both verbal and written communication.
Position: Auto AC Technician
Purpose/Role:
An Auto AC Technician is responsible for installing, maintaining and repairing heating, ventilation, air-conditioning and refrigeration systems. These professionals work in industrial, residential and commercial settings.
Key aims and objectives:
The aim of the AC Technician is to review blueprints, install air conditioning systems, test systems for proper functioning, performing emergency repairs, maintaining tools, ordering supplies, and making routine adjustments to maximize operational efficiency.
Prime Responsibilities and Duties:
Installs and repairs automotive air-conditioning units: Bolts compressor to engine block and installs driving pulley on front end of crankshaft.
Places fan belt on pulleys, adjusts tension, and tightens bolts.
Bolts evaporator unit under dashboard or in trunk.
Welds or bolts mounting brackets to automobile frame.
Drills holes through interior panels, threads hoses through holes and connects hoses to compressor, evaporator, and cool-air outlet.
Fills compressor with refrigerant and starts unit.
Measures compressor pressure to determine efficiency of compressor, using gauge.
Listens to operating unit for indications of malfunction.
Removes faulty units from vehicles, disassembles them, and replaces worn and broken parts and fluid in unit.
Makes electrical connections as required.
May specialize in installation of automotive air-conditioning units and be designated Automotive Air-Conditioner Installer.
Other Duties:
All other reasonable duties when requested.
The Persons:
Minimum 3 years Auto AC experience.
Able to work well within a team based environment.
“Can do” attitude to work.
Strong commitment to the Nigerdock ethics policies.
Knowledge of the tools, equipment, and materials common to the electrical trade.
Knowledge of applicable electrical codes, standards, and regulations.
Knowledge of electrical application for high and low voltage electric system.
Skill in the installation, repair and maintenance of all types of electrical system equipment and components.
Position: Bar Supervisor
Purpose/Role:
Responsible for the Bar & Lounge facility and the financial controls and stock0 in the Bar.
Key aims and objectives:
Financial controls of all money received by Bar Staff
Overseeing the management of Bar and Bar stock
Dealing with staffing and client issues
Prime Responsibilities and Duties:
Accountability for all money received from Bar using POS System
Paying of all money received to Financial Controller
Responsible for all Bar activities including Stock & Sales
Maintenance and Cleanliness of Bar & Lounge facility
Liaise with ND staff to ensure the continued provision of the appropriate service
Handles complaints and special requests
Monitors work schedules and staff performance against established benchmarks
Monitors hygiene and food handling practices for compliance with established policies and procedures
Conducts periodical stock takes as necessary and ensures stock rotation
Enforces safety requirements and models safe behavior
Communicates routinely with staff through meetings, on the job sessions, and other methods
Demonstrates team building and leadership skills
Attends and participates in training activities and attends meetings as required
Ensures security of departmental equipment and inventory
Ensures Company confidentiality
Performs duties as assigned by the Camp Management team
Conducts annual appraisals for the Bar Staff
Other Duties:
Maintain training records for all staff, ensuring that individual needs are recognized and met either through on or off job
The Persons:
Strong leadership and motivating skills including the ability to build strong relationships with customers and staff
Financial, budgeting and stock-taking skills
Excellent communication and interpersonal skills
Food Hygiene awareness
Ability to supervise and train employees when required
Computer literate
Ability to work in a busy, stressful environment with extreme changes of temperatures
Ability to utilise time efficiently to meet all job responsibilities
Using POS Systems and strong numeracy Skills
Position: Steward
Purpose/Role:
To clean and maintain the Housing Estate and surrounding areas
Key aims and objectives:
Maintaining a clean environment inside the Housing Estate
Maintaining a clean environment outside the Housing Estate when required
Cleaning all drainage areas
Prime Responsibilities and Duties:
Cleaning of all areas of the Housing Estate when required
Garbage removal from the house/Cabin to the skip area
General housekeeping, Bed Making
Maintain a high standard of hygiene at all times and ensure that you clean as you go, especially at the end of each shift
Enforces safety requirements and models safe behavior
Demonstrates team building and leadership skills
Attends and participates in training activities and attends meetings as required
Ensures security of departmental equipment and inventory
Ensures Company confidentiality
Performs other duties as assigned by the Housing Management
Laundering, Drying & Ironing of clothes
Weekly provision issue to House & Cabins
Any other manual tasks set by supervisor
Report any concerns to Supervisor
Firm understanding of COSHH
Defect reporting to Supervisor
Report for duty on time as per daily shift roster
Other Duties:
As defined by the Services Manager and Camp Manager
The Persons:
Good organisational and time management skills combined with a good level of initiative
Ability to manage in a diverse environment with a focus on clean as you go
Trustworthy
Good communication and interpersonal skills
Good understanding Chemicals and cleaning equipment
Ability to be on feet on hard surface for long periods of time
Ability to work in a busy, stressful environment with extreme changes of temperature.
Ability to utilise time efficiently to meet all job responsibilities.
Must be able to read and write
How to Apply
Click here to apply online.
Leave a Reply