Hobark International Limited (HIL), is an Integrated Services Company whose subsidiaries: DrillPet International Limited (DIL), Uniterm Nigeria Limited (UNL), UltiProc Nigeria Limited (UPNL), Hobark Consultant Management Services (HCMS) and Gigasecprovide Manpower Services & Logistics Support, Drilling Operations and Consultancy Services, On/OffShore Catering Services, Drilling Rigs & Drilling Bits and Procurement Services to the Oil & Gas Industry. IP security services.
We are recruiting to fill the position below:
Job Title: Piping/Structural Works Foreman
Location: Lagos
Job Description
Responsible for the health, safety and welfare of his team.
- Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
- Manages day to day activities within his specific discipline
- Provides technical knowledge, expertise and supervision for welding, cutting and rigging
- Verifies that all procedures, specifications and standards are followed
- Ensures works preparation before site works performance (survey, isometrics verifications, materials/tools preparation/supplies, access, lifting, prefabrications, logistics…)
- Follows performance of works on site (respect of specification and best practices)
- Responsible of QA/QC for his discipline
- Inspects the performed works or follows inspection done by COMPANY
- Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
- Assists the planning team by giving any technical support for Akpo Fabric Maintenance preparation of the jobs in his discipline
- In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
- Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
- Manages the specific team of technicians (welders, fitters, riggers …) within your discipline.
- If requested, identify additional resources
- Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
- Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
- Ensures that all daily, weekly and monthly reports are completed as required.
- Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
- Ensures that any faulty or damaged equipment is quarantined and details are reported
- Where required, assists with methods support and return information to the relevant representative.
- Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
- Ensures awareness with KPI requirements
- Ensure that all members of the team are focused on delivery of HSE and Quality plans.
- Ensures that all workers have the relevant qualifications and certificates to performed the required works through a specific register (with qualification matrix and relevant certificates dedicated to each workers)
- Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
- When existing in charge to manage the dedicated piping workshop (cleaning, materials/tools states , welding products/consumables storage, personnel individual means, protection, …)
Requirements
The holder of this position must have the following qualifications:
- Bachelor/ College Degree
- At least 5 to 10 years of experience in manufacturing, fabrication, welding and cutting
- Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
- Experience and knowledge of metallurgy, welding procedure & specifications, and QA/QC related to his discipline Akpo Fabric Maintenance Service
- Specific professional knowledge: CMMS : SAP/R3,
- Ability to work in a large multinational team
- Ability to work independently while maintaining good relations with colleagues and others
- Physical ability to work on offshore installations in the climatic conditions of the site
- Working language: English mandatory, French is an advantage
Primary Skills:
- Engineering, EPC, Drilling Operations, Oil & Gas, Operations, Production
Job Title: Painting/Blasting Foreman
Location: Nigeria
Job Description
Location: Nigeria
Job Description
- Responsible for the health, safety and welfare of his team
- Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on painting operations placed under his responsibility
- Manages day to day activities within his specific discipline (scheduling, personnel assignment, material management…)
- Responsible for respect of blasting and painting/coating specifications
- Applies and verifies the surface preparation following relevant specifications and best practices
- Provides technical knowledge, expertise and supervision of blasting and painting operations
- Verifies that all procedures, specifications and standards are followed
- Inspects surface preparation before painting operations
- Inspects painting products application in term of QA/QC (in particular
- verifies type of products applied and relevant thickness- wet & dry)
- Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
- Assists the planning team by giving any technical support for preparation of the jobs in his discipline
- In charge to manage, monitor and maintain the painting products materials stored on site and ensures that all painting products and materials are stored in good conditions and free from defects – Replaces Akpo Fabric Maintenance the unusable materials
- In charge to update and maintain on site painting products/material register.
- Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
- If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
- Ensures that day to day requirements are met with regards to Scope, specifications and best practices,
- Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation. .
- Ensures that all daily, weekly and monthly reports are completed as required.
- Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
- Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
- Ensures that any faulty or damaged equipment is quarantined and details are reported
- Where required, assists with methods support and return information to the relevant representative.
- Ensures awareness with KPI requirements
- Ensure that all members of the team are focused on delivery of HSE and Quality plans.
- Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Qualifications
The holder of this position must have the following qualifications:
- Diploma and/or Degree holder
- At least 5 to 10 years of experience in blasting/painting activities in industrial context
- NACE 2 certification or equivalent AQCPA – FROSIO
- Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
- Specific professional knowledge: CMMS : SAP/R3,
- Ability to work in a large multinational team
- Ability to work independently while maintaining good relations with colleagues and others
- Physical ability to work on offshore installations in the climatic conditions of the site
- Working language: English mandatory, French is an advantage
Job Title: Rope Access Foreman/L3
Location: Lagos, Nigeria
Job Descriptions
- Responsible for the health, safety and welfare of his team.
- Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
- Manages day to day activities within his specific discipline
- Provides technical knowledge, expertise and supervision for Rope Access activities
- Verifies that all procedures, specifications, standards and legislation are followed
- Ensures works preparation before site works performance (risk assessment, techniques to be applied, rescue preparation, equipments preparation, checking/testing, backup devices, definition of anchors systems and points, rope and slings protection, lifelines when required, … )
- Follows performance of works on site (respect of rules, specifications, regulations and best practices)
- Responsible of QA/QC for his discipline
- Proposes alternatives to complex interventions
- Have a comprehensive knowledge of advanced rescue techniques and participate, with his team, to first aid operations Akpo Fabric Maintenance Service Page 33 of 35
- Be able to give assistance for painting, piping, NDT inspection to other relevant disciplines when access to equipment/installation is complex
- Check intervention reports in and write the technical reports related to his activity field
- Assists the planning team by giving any technical support for preparation of the jobs
- In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
- Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
- Manages the specific team of technicians (IRATA level 1 & 2) If requested, identify additional resources
- Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
- Ensures that all daily, weekly and monthly reports are completed as required.
- Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
- Where required, assists with methods support and return information to the relevant representative.
- Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
- Ensures awareness with KPI requirements
- Ensures that all members of his team have the relevant qualifications and certificates to performed the required works through a specific register (with qualification matrix and relevant certificates dedicated to each workers)
- Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Qualifications
The holder of this position must have the following qualifications:
- Bachelor/ College Degree
- IRATA level 3 mandatory
- At least 5 to 10 years of experience in rope access supervision
- Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
- Experience and knowledge of painting and NDT inspection operations with related QA/QC aspects and qualifications when required
- Ability to work in a large multinational team
- Ability to work independently while maintaining good relations with colleagues and others
- Physical ability to work on offshore installations in the climatic conditions of the site
- Working language: English mandatory, French is an advantage
Primary Skills
- Drilling Operations, Engineering, EPC, Oil & Gas, Operations, Production.
Job Title: Scaffolder
Location: Lagos
Job Descriptions
Location: Lagos
Job Descriptions
- Erecting and dismantling of scaffold
- Working close with Scaffolding Foreman as required on the job.
- Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
- Verifies that all procedures, specifications and standards are followed
- Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
- Manages the specific team of technicians within your discipline.
- If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
- Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
- Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
- Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
- Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
- Ensures that any faulty or damaged equipment is quarantined and details are reported
- Where required, assists with methods support and return information to the relevant representative.
- Ensures awareness with KPI requirements
Qualifications
The holder of this position must have the following qualifications:
- Technical Diploma
- At least 5 years of experience in scaffolding activities in industrial context
- With relevant scaffold professional qualification certificates (like Basic Part1, Basic Part2, Scaffolding inspector,…) delivered by accredited organism
- Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
- Capabilities to design & calculate scaffold following location, loads …
- Ability to work in a large multinational team
- Ability to work independently while maintaining good relations with colleagues and others
- Physical ability to work on offshore installations in the climatic conditions of the site
- Working language: English mandatory, French is an advantage
Primary Skills
- Engineering, EPC, Completions Engineer, Oil & Gas, Operations, Production
Job Title: Safety, Health, Environment and Quality (SHEQ) Manager
Location: Lagos
Job Summary
The employee will be responsible to implement and manage the:
Location: Lagos
Job Summary
The employee will be responsible to implement and manage the:
- Company wide Integrated Management System
- SHEQ System and Procedures
- Maintenance of ISO Certifications
Summary of Essential Job Functions
- Responsibility for the implementation of the company’s ISO-9001 compliant quality management system (QMS) throughout the business
- Responsibility for the implementation of the company’s ISO 140001:2004 compliant environmental management system (EMS) throughout the business
- Responsibility for the implementation of the company’s OHSAS 18001: 2007 Occupational health, safety management (OHSMS) compliant system throughout the business
- Compile the SHEQ statistics and other data required for the management review and implement agreed actions focusing on continuous improvement of the QMS, EMS and OHSMS
- Liaise and coordinate with Heads of Departments to ensure corporate and contractual SHEQ requirements are implemented and targets met
- Manage, organise, and execute process, accident/incident investigation and system audits throughout the business
- Manage, organise, and execute risk assessments
- Ensure adequate posting of safety notices / circulars
- Maintain metrics to monitor and close-out of audit findings
- Develop customer focused information packages, presentations and solutions during the tender phase of projects, maintaining continuity during handover to project teams and/or the Heads of Departments
- Develop and implement continuous improvement, customer-oriented solutions
- Interact cross functionally with project and functional management to resolve quality health, safety & environment issues
- Review technical requisitions and procurement documentation for quality, health, safety & environment compliance
- Manage, plan and implement subcontractor / vendor audits to meet QMS / SMS & EMS, project and corporate requirements
- Develop and distribute management reports
- Audit Departmental compliance with contractual requirements
- Develop, implement and monitor continuous improvement action plans
Experience Required:
- 20 years’ experience
- Working as an HSE and/or SHEQ Manager for international companies in construction and oil and gas
- Experienced in implementing new SHEQ systems
- Experienced in getting and maintain ISO certifications
Primary Skills:
- EPC, Engineering, BSc, Oil & Gas, QA/QC, Quality Control
How to Apply
Leave a Reply