Total Upstream Nigeria Limited (TUPNL) Job Recruitment, November 2016

Onstream Group – With more than three decades of global industry experience, the company is now structured as a group of business units, each with its own specialisations. 


Through these units, the Group can provide tailored services to address the needs of our clients worldwide in the most effective and competitive manner.


Our client, Total Upstream Nigeria Limited, is recruiting to fill the positions below:

Job Title:  UFR Offshore NDT Supervisor
Job description 
The holder of this position shall provide a valuable technical expertise in non destructive testing of steel structures and pipelines, he will be fully conversant with MPI, Dye-penetration, AUT, manual UT and Radiography techniques applied in the control of pipelines and structures welds. During the offshore installation phase, he will be working in a shift in order to ensure 100% coverage of inspection on the laybarge working 24hrs per day.


Activities 
The UFR Offshore NDT supervisor is responsible for all Offshore NDT activities during his shift and is directly accountable for the correct interpretation of all AUT and other NDT activities.


NDT Activities
As the specialist in pipeline/structural Non Destructive Testing, on board the UFR CTR flowlines laying vessel the NDE Interpreter shall: 

  • Make sure the weld preparation and fit-up are acceptable as per specifications;
  • Make sure the welds and their non destructive testing are duly identified;
  • Ensure that NDE equipment and procedure on use onboard are in accordance with the project specifications;
  • Ensure all pipeline welds AUT or X-rayed during his shift are duly interpreted by the NDE agents of CONTRACTOR;
  • Supervise NDE processing and make sure it is done according to good workmanship;
  • Witness all the NDE done during his shift, make his own interpretation of the results and agree with the NDE;
  • CONTRACTOR about the status to be given to the welds. In the absence of TPA onboard the vessel, the NDE Supervisor will act as the highest technical authority on board to validate NDE interpretation;
  • Inform the COMPANY Main Representative about all shortcomings, problems and/or major defects detected in the fabrication;
  • Ensure that the traceability of NDE results is well maintained onboard through appropriate QC records. Collect the inspection reports carried out during its shift and file them properly on board available for the CY main representative;
  • Liaise with UFR welding specialist when required. 

During the mobilisation phase, he shall be able to judge the capability and skillfulness of welders in order to support the following: 

  • Inspection and expertise of any NDE carried out on installation aids or auxiliary fabrications as per specifications;
  • Evaluation of the NDE to be carried out on auxiliary fabrications if they are not specified in the NDE manual;
  • Assessment of welders;
  • Collection and verification of welders certificates;
  • Follow-up of welders.

HSE

  • Safety is the core value of the COMPANY’S Group and shall be the first and foremost priority for all COMPANY offshore personnel. The NDT Supervisor shall demonstrate exemplary HSE behavior and ensure that all acts under his supervision are conducted in a safe manner according to the COMPANY’S Golden Rules, CONTRACTOR HSE rules and all international and local regulations. In particular the NDT Supervisor shall:
  • Report safety improvements, anomalies and incidents according the HSE management system on board the vessel;
  • Stop immediately all unsafe acts by COMPANY, CONTRACTOR or third party personnel;
  • Be a safety leader for all CONTRACTOR and subcontractor staff in his domain of supervision;
  • Not engage in any unsafe acts.

Job Requirements 

  • Previous offshore AUT experience on board J-Lay a pipe laying vessel;
  • AUT and X-ray radiography interpretation qualification up to date;
  • Certified UT inspector: Level 2 (3rd party) as per ISO 9712 or, Level 3 as per ISO 9712;
  • Fully conversant with DNV OS-F101 / API 11-4 welding code as well as GS EP PLR 420/421 and 430;
  • Having a solid experience in AUT and film reading for offshore pipeline;
  • Fluent in English (verbal and written);
  • BOSIET certificate;
  • 28 day rotation (4 x 4).

Accountabilities

  • The Offshore FJC supervisor is accountable to for:
  • The correct execution and interpretation of all NDT activities on board





Job Title:  UFR Offshore Company Representative
Job description 
The SERVICE holder is UFR Contractor’s focal point for day to day activity onboard the installation vessel.
In a narrow coordination with the UFR Installation team based in Lagos, the SERVICE holder shall:
– Supervise that the agreed procedures are respected during all the offshore presence of the installation vessel on EGINA site, mainly for the following activities performed onboard the vessel by UFR Contractor:
o Supply / Barge activities alongside or at close vicinity of the vessel
o Transfer of equipment onboard the vessel
o Deck operations
o Lifting, overboarding, lowering and landing of subsea structures
o Subsea ROV works
– Ensure that any modification of the agreed procedure is covered by the Management Of Change agreed process
– Sign in due time and when satisfactory preparation level has been achieved each specific Ready For Installation certificate.
– Communicate with onshore support to:
o Plan the coming operations
o Mobilise offshore relevant personnel from other packages (i.e. SPS & Umbilical Contractor Personnel)
– Communicate, in accordance with the defined project procedures, with COMPANY Representative acting onboard other vessel(s) working at Site in case of co-activities or SIMOPS activities.
– Ensure, when relevant, the interface onboard the vessel between MWS Representative and URF Contractor and ensure, in accordance with MWS agreed scope, that relevant MWS certificate has been issued.
– Ensure that ICAPS are filled, signed and transferred to URF Contractor’s ICAPS Coordinator
– Ensure recording of daily report activities on board and approves the daily report issued by CONTRACTOR. This reporting shall include activities on board the vessel but also any other activities interfacing with his own activities.
The SERVICE holder will lead the COMPANY supervision team onboard the vessel.


Job Requirements 

  • – Sound background in Oil and Gas installations, marine operations and offshore construction.
  • – Minimum 10 years experience in Design and Installation of Subsea / Deepwater Steel Structures or previous exposure to UFR EPCI projects.
  • – Good knowledge of international structural design codes / standards and TOTAL general specifications.
  • – Good organizational skills
  • – Experience in leadership and team management
  • – Fluent in English (verbal and written).
  • – BOSIET certificate

 Interested and qualified candidates should Click Here to Apply for this Position







 How to Apply


Click Here to Apply for this Position 


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *