Amaiden Energy Nigeria Limited, (formerly Moody International Nigeria Limited) was established in 1996 as a partnership between Moody International Group and Nigerian investors. Since commencing operations in March 1997 the company continues to grow and exerts its presence in numerous Projects in the Nigeria Oil and Gas Industry.
We are recruiting to fill the position below:
Job Title: Senior Electrical & HVAC Engineer
Location: Port Harcourt, Rivers
Category: Others
Job Type: Contracts
Job Nature: Resident
Description
- Provide technical support to the JV site maintenance teams for Electrical/HVAC equipment, acting as focal technical authority with regard to Electrical/HVAC equipment engineering and providing expert technical advice.
- Lead the troubleshooting of complex or recurring electrical problems, which require analysis and resolution with the help of other departments, vendors or original equipment manufacturer OEM, and recommend sound and cost effective solutions.
- Prepare cause tree failure analysis for equipment breakdown and issue relevant recommendations.
- Administer the planned preventive maintenance program for Electrical/HVAC equipment and ensure that the maintenance tasks undertaken are adequate to prevent unplanned equipment failure.
- Lead and advise the development and planning of Electrical/HVAC equipment modifications and improvement projects, to ensure their safe, cost-effective and timely execution in accordance with established Company standards and specifications.
- Review and control the standardization of materials and spare parts for Electrical/HVAC equipment and related systems.
- Review stock quantities, usage and consumption to minimize the stock value, whilst ensuring that all spare parts are available for routine, defect and shutdown maintenance.
- Assist and advise the Electrical/HVAC Head in the preparation of budgets, contracts, shutdowns, modifications, warranty claims, vendor mobilization and all other support functions necessary for the efficient running of the Electrical/HVAC section.
- Prepare scopes of work for approved work programs ensuring that all relevant operating procedures and safety regulations are written in and that all necessary materials and equipment are available as and when required.
- Treat material requests from Site Maintenance, make quality control on spares to be sent and prepare movement forms for available stocks to ensure proper materials descriptions, nomenclatures etc.
- Monitor and update materials MRP (Materials Requirements Planning) – mini/max, supervised etc. stocks and with the approval of Electrical/HVAC head, add or delete items as necessary.
- Propose/Justify recommendations for the improvement of equipment availability, efficiency and maintainability.
- Liaise with vendors and the original equipment manufacturers for all queries regarding maintenance, modifications, spare parts, drawings and the resolution of technical problems.
- Ensure that single line drawings, plans, manuals etc., are up-to-date and “as built” and direct draftsmen to carry out all corrections and reflect any alterations, modifications and additions to electrical equipment system.
- Review and check work completed by contractors, ensures compliance with work satisfactorily completed, make necessary corrections and submit to the Electrical/HVAC Head for endorsement and payment processing.
- Follow-up statutory equipment inspection of assets, integrity assurance and certifications.
- Carry out any other duties/projects that may be assigned to him/her by the hierarchy
Job Requirements
Formal Education:
- B.Sc. in Electrical Engineering. (2.1) or its equivalent.
Professional Experience (number of years):
- 15 years’ experience, preferably with Oil and Petrochemical Industries.
- High level of knowledge, specialized in power generation, PDCS, LV/HV switchgear, LV/HV electrical protection equipment, UPS and HVAC systems.
- Team management skills.
- Working knowledge of computer applications and methods.
- Proficiency in English language.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Senior Corrosion Engineer
Category: Others
Job Type: Contracts
Job Nature: Resident
Job Description
Location:
Port Harcourt, RiversCategory: Others
Job Type: Contracts
Job Nature: Resident
Job Description
- Manage planning and execution of Corrosion Inspection activities for all JV Field Operation in Offshore and Onshore locations.
- Define/review the Corrosion Management document which describes the organization, responsibilities and accountabilities, tasks, programs, procedures and guidelines.
- Prepare/ implement preventive actions for corrosion mitigation i.e. engineering, physical and chemical treatments, cathodic protection, metallic or non-metallic material selection, painting & coating and process modification.
- Perform corrosion studies with the aim of ascertaining or improving the integrity of production facilities.
- Investigate and analyze facility malfunctions vis-à-vis integrity requirements from the stand point of corrosion evolutions and in liaison with the Inspection Engineers, propose solutions to reduce corrosion velocity and prevent repetitions of the problem, and report same to the Inspection Manager.
- Work in liaison with Operation team and/or accredited third party as may be directed by the Inspection Manager to plan, schedule, and execute corrosion surveys/studies, and recommend necessary remedial actions.
- Contribute in defining external resources requirement for the Corrosion Department.
- Feed and update Company databases requiring corrosion expertise input like Fame +.
- Liaise with construction teams to review and recommend corrosion mitigating measures in the early phases of engineering and during the project execution phase.
- Define the scope of work, budget, and planning for corrosion monitoring, cathodic protection, painting and prevention campaigns.
- Prepare corrosion methods, management systems, tools, planning, contracts and cost control of corrosion activities.
- Prepare / implement corrosion monitoring activities, i.e. follow up chemical injection rates, cathodic protection, coupons and corrosion probes, ER probes, chemical analysis, bacterial counts.
- Review corrosion monitoring and inspection results regularly and assess together in view of providing a global evaluation of integrity. In this case, study laboratory and treatment reports in relation to asset inspection and integrity management.
- Propose new chemical treatments or adjustments in the existing ones.
- Prepare and follow cathodic protection monitoring and surveys: scope of work, call for tender, execution follow up, interpretation of results.
- Investigate and analyze cathodic protection results, report any anomalies and propose solutions to prevent repetitions of the problem, and report it to the Inspection Manager.
- Prepare and follow cathodic protection corrective actions when required: scope of work, budget; call for tender and execution follow up.
- Design new cathodic protection systems or oversee designs by others where needed.
- Define periodic coating surveys on all structures/equipment.
- Define recoating strategies, select or write coating application specifications; ensure compliance with CPY standards or seek derogations as required.
- Ensure adequate expertise is available for QC control during execution of coating works.
- Generate clear and concise reports for planned and ad-hoc inspections, highlighting abnormalities.
- Assimilate reports into corrosion master data, updating test results, generating corrective work orders and other data as required.
- Ensure that all activities are carried out in strict compliance with the safety regulations and the procedures contained therein
Job Requirements
- B.Sc in Engineering (Chemical, Mechanical, Material & Metallurgy Engineering).
- Higher qualification in Corrosion Engineering (MSc or NACE Snr Corrosion Technologist).
- 15 years experience in corrosion engineer’s functions, preferably in the oil and petrochemical industry, at least 3 of which must be in a general asset inspection management position.
- Excellent communication and negotiation.
- Computer literacy.
- Cathodic Protection and or Coating Inspectors Certification by a recognized body (i.e. B Gas / NACE) would be an advantage
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Senior Crane & Marine Equipment Engineer
Location: Rivers
Category: Others
Job Type: Contracts
Job Nature: Resident
Description
- To prepare all methods support and implementation of practice documents regarding preventive maintenance, inspections and testing to be performed on fleet cranes based on recognized best practice and applicable regulations.
- To prepare and develop specifications for new cranes and lifting equipment based on recognized international standards.
- Co-ordinate planned crane maintenance activities fleet-wide.
- Manage specialized crane maintenance vendors interventions and contracts (BLM, Hydralift, Aero, Sparrow, Mape) within SMC frame agreements (including technical scope of work) where applicable.
- Ensure the implementation and assurance of Company integrity management system compliance.
- Liaise with classification societies/third party design offices where applicable.
- Support JV asset installations for all related crane issues (specifically for new cranes, specification for upgrades and heavy lift works on cranes).
- Liaise with crane manufacturers when required.
- Participate in and/or lead investigations for all crane related incidents across the fleet.
- Interface with JV asset HSEQ Department for all crane related issues.
- Liaise with JV asset staffing regarding all related training issues and certification for crane operators.
- Supervision, until completion, of 5-years major overhauls in all JV asset installations cranes.
- Follow spare parts stocks with Warehouse and Procurement.
- For all cranes, Winches (Food, Turbines, boat, etc.) & Work boat, Survival Craft, Lifeboat, life rafts, davits:
- Review/Produce Maintenance Plan as per Vendor recommendations.
- Review/Correct/Create corrected BOMs in SAP, establish MRP parameters.
- Ensure equipment are certified by third parties.
- To assist sites with routine troubleshooting, local emergency procurements.
- To assist Procurement Department with clarifications.
- To coach and train junior engineers in all aspect related to the maintenance of lifting and marine equipment.
Job Requirements
- Formal education: B.Sc in Mechanical Engineering (2.1).
- Professional experience (number of years): 15 years experience with:
- Technical knowledge and experience in hydraulic power transmission and control systems.
- Proven experience working with heavy machinery/equipment.
- Extensive experience within maintenance, fault finding, build and procurement of equipment projects.
- Team management skills.
- Computer literacy.
- Proficiency in English language.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Senior Programmable Logic Controller (PLC) Engineer
Location: Port Harcourt, Rivers
Category: Others
Job Type: Contracts
Job Nature: Resident
Job Description
- Schedule and carry out Bi-monthly PM’s on all sites, perform extraction and analysis of all Site operational alarms.
- Completion of all Site Modificatiom Request (SMR) activities related to PLC packages.
- Ensure all PLC modification register on all sites are up to date.
- Perform catography of all PLC Package equipment and submit to Head of Instrumentation/ICSS for validation
- Ensure all documentation (backup plan, disaster recovery, anti-virus/patch update plan) are intact and up to date.
- Obsolescence management and regular review of Long term upgrade plans.
- Implement cybersecurity requirements as directed by Head of Instrumentation/ICSS.
- Organize annual audit and participate in Risk assessment review when required.
- Development and input of all planned maintenance activities in the COMPANY’s Computer Maintenance Management System (CMMS) – UNISUP.
- Management and follow-up of all PLC package jobs being done by a third party contractor.
- Provision of technical support, failure analyses and specialist engineering services.
- Implementation, testing and commissioning of any approved modification
- Provide technical support to the Maintenance team and act as the focal point for PLC matters. Provide expert technical reports to the Head of Instrumentation/ ICSS, Head of Site Maintenance and other departments.
- Supervise and manage the implementation of minor modifications and improvement projects, to ensure their safe, cost-effective and timely execution in accordance with established Company standards and specifications.
- Review and control the standardization of materials and spare parts for equipment and related systems. Review stock quantities, usage and consumption to minimize the stock value, whilst ensuring that all spare parts are available for routine, defect and shutdown maintenance.
- Preparation (spare parts, manpower, tools, and procedures) of levels 3 to 5 maintenance intervention applicable to PLC units, and other automation packages which are integrated with the ICSS systems.
- Regular review of reliability and maintainability of existing systems, implementation of upgrades and retrofits to address obsolescence.
- Supervise the execution of specific maintenance contracts applicable to Package systems and ensure the optimal usage of contracted resources towards achieving 100% availability.
- Liaise with vendors and the original equipment manufacturers for all queries regarding maintenance modifications, spare parts, drawings and the resolution of technical problems.
- Ensure that all drawings, plans, manual are up-to-date and “as built”, and direct draftsmen to carry out all corrections to reflect any alterations, modifications and additions to electrical equipment systems.
- Review and check work completed by contractors and site teams, ensure compliance with work satisfactorily completed, make necessary corrections, and submit to the Head of Instrumentation/ ICSS for endorsement and payment processing.
- To participate in SMR and projects realized by ECP as follows – to validate revisions to Package control FDS, to ensure proposed changes are in conformity with Company GS (General Specifications) and specific requirements of each plant, to expedite an effective handover of new modifications/projects to operations entity.
- Give support to all site locations and to mobilize to any JV site immediately, if required.
- Training of staff working in the team as requested by the Head of Instrumentation/ICSS.
Job Requirements
- Formal education: B.Sc. in Instrument and DCS Engineering or Electronics and Electrical Engineering (2.1).
- Professional experience: 15 years experience with industrial discipline, specifically with the oil or petrochemical industries.
- Personnel would be properly skilled and trained with in-depth knowledge in PLC Ladder Logic programming.
- Personnel would be properly skilled and trained with in-depth knowledge in Allen Bradley PLC’s, SIEMENS and SCHNEIDER PLC’s.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Job Title: Senior Inspection Methods Engineer
Location: Nigeria
Job Type: Contracts
Job Nature: Resident
Description
- Manage planning of Inspection activities for all JV Field Operation in Offshore and Onshore locations.
- Validate/Review/Prepare individual equipment risk assessment through FAME+.
- Review & Approve/Interpret & Convert FAME+ assessment result into complete inspection plan in SAP/UNISUP.
- Prepare/Update/Validate export facilities consumables (hose, etc.) replacement & procurement plan to ensure the optimum availability of the facilities for export operation.
- Review and Update/Prepare complete inspection plan (Equipment, scope, schedule, resources, inspection method, etc.) in SAP.
- Review & Validate/Develop & Update/Contribute in the preparation of the department annual and mid-term inspection planning.
- Review & Up-load/Assist in uploading of inspection results into work-book.
- Validate/Review/Perform 2nd level analysis on inspection result and issue report complete with the recommendation(s).
- Validate/Review/Prepare inspection history and their up-dating within asset register.
- Perform/Contribute in regular review on inspection processes and define the necessary improvement of the system.
- Validate/Develop/Contribute to development of QA/QC system for repair, fabrication and installation works.
- Provide/Assist in providing advice on QA/QC matters to construction team.
- Approve/Review/Participate in review of contractor’s quality plan for repair and modification works on existing facilities.
- Conduct/Participate in failure analysis or CTA on inspection related failure/incident.
- Ensure/Participate in establishing & maintaining good relationship with external bodies, in particular the authority.
- Ensure adequate expertise is available for QC control during execution of coating works.
- Generate clear and concise reports for planned and ad-hoc inspections, highlighting abnormalities.
- Ensure that all activities are carried out in strict compliance with the safety regulations and the procedures contained therein.
Job Requirements
- B.Eng. in Engineering discipline: Mechanical, Material & Metallurgy, and Chemical.
- Higher qualification in Corrosion Engineering (M.Sc or NACE Snr Corrosion Technologist).
- Computer literacy.
- 15 years experience in inspection engineer’s functions preferably in the oil industry, at least 3 of which must be in a general asset inspection management position.
- Excellent communication and negotiation skills.
- Cathodic Protection and or Coating Inspectors Certification by a recognized body ( i.e B Gas/ NACE) would be an advantage.
Deadline:31st July, 2018.
How to Apply
Interested and qualified candidates should:
Click here to apply online
Leave a Reply