Ongoing Recruitment at ASC Nigeria Limited in Rivers State

ASC Nigeria Limited, a member of the Onstream Group is currently seeking application from suitably qualified candidates to fill the vacant position below:

Job Title: Senior Design Engineer – Instrumentation & Control

Location: Rivers State

Job Description

  • The successful candidate would support the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects. Ensures that the instrumentation engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

The duties will Include but are not limited to the following:

  • Responsible for delivering the instrumentation and process control engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of top-quartile, competitive and affordable projects
  • Apply the relevant project and engineering procedures in line with the appropriate engineering and design requirements and ensure value creation and protection
  • Ensure all Instrumentation (Process control and automation) engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery
  • Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other Technical Authority to provide appropriate technical assurance on projects.
  • Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects
  • Carry out instrumentation design reviews on third party design packages including, BDP, FEED, Detailed Design to ensure compliance of the deliverables with provident of the applicable Design standards and specifications as part of the overall project quality assurance program.
  • Provide support for instrumentation engineering studies and change impact analysis as part of the Management of Change (MOC) procedure. Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential lmpacts on project philosophy and existing design
  • Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery

The Person
The right candidate should possess the following:

  • A University degree in Electrical
  • Extensive experience (7-10 years) in the Oil and Gas industry with direct experience of project engineering or similar engineering, design, construction and maintenance.
  • At least 4 years should have been spent leading instrumentation engineering design
  • Experience shall cover design, specify, construction and commissioning of field instrumentation, quality measurement instruments, custody transfer & metering, process automation system, Fire & Gas Systems
  • The right candidate shall be competent in the usage of the following software:
  • SPI (Intools), AutoCAD, InstruCalc

Job Title: Senior Design Engineer – Civil

Location: Rivers State

The Job

  • The successful candidate would support the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects. Ensures that the Civil / Structural engineering design for assigned capital project is carried out safely to applicable codes and standards utilising Industry best practices to achieve error free and on-schedule project delivery.

The duties will Include but are not limited to the following:

  • Responsible for delivering the civil/structural engineering design package for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable
  • Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
  • Ensure all civil/structural engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical discipline to ensure an integrated delivery.
  • Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other Technical Authority to provide appropriate technical assurance on projects.
  • Carry out and perform basic and detailed design and engineering work Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawing as may be required for specific projects
  • Carry out civil/structural design reviews on third party design packages including, BDP, FEED, Detailed Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
  • Provide support for civil/structural engineering studies and change impact analysis as part of the Management of Change (MDC) procedure.
  • Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
  • Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
  • Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation

The Person
The right candidate Should possess the following:

  • A University degree in Civil / Structural Engineering
  • Extensive experience (7-10) years in the Oil & Gas industry with direct experience of project engineering, design and construction. At least 4 years should have been spent leading civil design work
  • Experience shall include design, specify, execute and construction of onshore & marine civil structures in steel and concrete, Geotechnical and foundation design and analysis

The right candidate shall be competent in the usage of the following software:

  • AutoCAD
  • PDMS or E-3D
  • STAAD Pro
  • Navis Work

 

Job Title: Senior Design Engineer – Mechanical

Location: Rivers State

The Job

  • The successful candidate would support the Lead Design Engineer in the Project Delivery organisation in ensuring effective coordination and delivery of design and engineering work for capital projects. Ensures that the mechanical engineering (static/rotating) engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

The duties will include, but are not limited to the following:

  • Responsible for delivering the mechanical (static/rotating) engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of top-quartile, competitive and affordable projects.
  • Apply the relevant project and engineering procedures in line with the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
  • Ensure all mechanical (static/rotating) engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
  • Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other Technical Authority to provide appropriate technical assurance on projects.
  • Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects.
  • Carry out mechanical (static/rotating) design reviews on third party design packages including, BOP, FEED, Detailed Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program
  • Provide support for mechanical (static/rotating) engineering studies and change impact analysis as part of the Management of Change (MOC) procedure. Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design

The Person
The right candidate should possess the following:

  • A University degree in Mechanical
  • Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design, construction and maintenance in Mechanical & Rotating equipment. At least 5 years should have been spent leading mechanical engineering design. Experience shall include design, selection construction of piping & valve systems, pressure vessel & heat exchangers and other process & rotating equipment

The right candidate shall be competent in the usage of the following software:

  • AutoCAD
  • CEASER
  • PDMS or E-3D
  • Navis Work
  • Microstation etc.

 

Job Title: Senior Design Engineer – Process

Location: Rivers State

The Job

  • The successful candidate would support the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital project. Ensures that the process engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

The duties will include, but are not limited to the following:

  • Provide timely and pro-active technology supports for integration of projects covering Masterplans for process, utility, plot layout, product evacuation and gas supply; Reviews and audits with respect to consistency and integrity at the interfaces; Development studies with various SMEs for growth projects; Review, ensure and maintain quality of a critical process safety document- Process Engineering Flow Schemes (PEFS), Plant modifications related to the project interfaces prior to Management approval to ensure operational integrity of the process plant.
  • Review of all technical integration input for process and utilities projects, including quality control of deliverables, whilst meeting process technical safety assurance, to ensure the quality and technical integrity of new installations by maintaining minimum required codes; applying requisite design criteria and standards as prescribed by Client standards and best practice in the industry; and applying strategies that aim for minimum life cycle costs,
  • Provide process & utilities technological support to assure the quality of in-house process technical safety risk assessments as applied by TA in the execution and quality assurance of utilities and process technical safety reviews (HAZOP, PSSR, etc.) for plant changes and third party projects integration, ESP, Al-PSM and Bow-tie development in conjunction with the other discipline Client’s Technical Authority (TAs).
  • Provide process engineering support to achieve maximum profit for the Client through evaluating energy efficiency, production capacity, and process reliability of new plant projects expansion projects and Third-Party Projects deliverables plan for projects. Liaise with the Corporate Engineering and Other SMEs/TA to provide appropriate technical assurance on projects.
  • Demonstrate HSSE Leadership, champion Production Risks and Process Safety accountabilities in Implementation, execution and management of process & utilities integration support with new plant projects, growth projects and Third-Party Projects. Drive the review of and learning from proactive observations and incidents,
  • Review vendor documentation to ensure compliance with requisite standards, codes and regulations far integration within the project design. Provide input for equipment selection and integration, Implement best practices for Integration of equipment within a modularization philosophy including inspection/commissioning/testing related to commissioning, start up and integration of new facilities
  • Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery.

The Person
The right candidate should possess the following:

  • A University degree in Chemical Engineering or other engineering/science discipline
  • Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project  engineering design, construction and maintenance. At least 5 years should have been spent on Process Engineering experience in the oil and gas industry.
  • Experience shall Include process design and conceptual development, process control, modeling and analysis In Petrochemical, Refinery, E&P and Gas plants environment; including execute, and start-up phase.

The right candidate shall be competent in the usage of the following software

  • UniSim, Hysys or Pro II

Deadline: 9th July, 2020.

Method of Application
Interested and qualified candidates should forward their CV to: r.inbox@ng.asc.net (Include the position applying for in the subject of your email).

Additional Information

  • Only shortlisted candidates would be contacted for interviews,
  • Any false information provided during or after the application process will lead to outright disqualification of such candidates(s)

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *