Massive Recruitment at International Energy Services Limited (IESL)

International Energy Services Limited (IESL), established in 1990, is a specialist, multidisciplinary, energy services company that provides integrated, client-focused and cost-effective services in the oil and gas industry.

We are recruiting to fill the positions below:

Job Title: Senior Design Engineer – Electrical

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the electrical engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering the electrical engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of top-quartile, competitive and affordable projects
• Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
• Ensure all electrical (static/rotating) engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects
• Carry out electrical design reviews on third party design packages including, BDP, FEED, Detailed Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
• Provide support for electrical engineering studies and change impact analysis as part of the Management of Change (MOC) procedure. Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• A University Degree in Electrical Engineering or similar.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design, construction and maintenance. At least 4 years should have been spent leading instrumentation engineering design.

Job Title: Senior Design Engineer – Mechanical

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the mechanical (static/rotating) engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering the mechanical (static/rotating) engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of top-quartile, competitive and affordable projects
• Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
• Ensure all mechanical (static/rotating) engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects
• Carry out mechanical (static/rotating) design reviews on third party design packages including, BDP, FEED, Detailed Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
• Provide support for mechanical (static/rotating) engineering studies and change impact analysis as part of the Management of Change (MOC) procedure. Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• A University Degree in Mechanical Engineering or similar.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design, construction and maintenance. At least 5 years should have been spent leading mechanical engineering design.

Other Job Requirements:
Key Considerations:

• Analytical: Ability to accurately evaluate detailed specifications particularly geared towards cost minimization without compromising other resource elements such as safety and quality
• Technical Skills: Job would require frequent visits to construction sites and other field/offsite locations. Detailed knowledge of industry processes, construction sequences, materials and procurement processes are required.
• Detailed oriented: must be meticulous and pay attention to details.
• Verbal and written communication skills: Ability to seamlessly communicate and write comprehensive reports for monitoring, tracking and to support decision making
• Support internal and external Audits.

 

Job Title: Senior CAD Designer – Process

Location: Bonny Island, Rivers

Job Purpose / Objective

• Manage the activities of TEA Drawing Office; including update of Process 2D drawings & 3D models for PDRs & SECs. Ensure that all field verification works are carried out in a safe and efficient way
• Supports the outputs of other disciplines to ensure compliance to NLNG Asset Information Management procedures, standards and formats.

Duties & Responsibilities

• Supervise the execution and close out of:
  • As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from NLNG departments and sections.
• Participate in the conversion to native files of NLNG Documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software,
• Produce technical drawings and documentation on AutoCAD to support NLNG activities as required from projects and discipline in accordance with NLNG Asset Information Management procedures and applicable standards.
• Supervise the preparation of Process technical designs for the draft works assigned.
• Review drawings to ensure alignment with NLNG’s approved procedures and applicable standards.
• Propose improvements and initiatives on NLNG CAD activities.
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into NLNG EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand.
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Ensure all CADed drawings are saved on NLNG livelink in accordance to the file naming convention
• Compile appropriate reports as required for specific assigned tasks in an accurate and timely fashion.
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of drawing office
• Develop weekly report to team lead on work progress
• Carry out all other activities assigned by Supervisor and Lead CAD Designer.

Job Requirements
Education:

• HND/B.Sc or equivalent in any Engineering discipline preferably Chemical, Petroleum or Mechanical Engineering.

Experience:

• Minimum of 7 years’ experience in CAD and design works with a minimum of 5 years experienced on a similar position in the oil and gas sector,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

 

Job Title: Principal CAD Designer

Location: Bonny Island, Rivers

Job Purpose / Objective

• Manages the activities of TEA Drawing Office; including update of 2D/3D models for PDRs & SECs.
• Ensure that all field verification works are carried out in a safe and efficient way
• Manages the outputs of the various disciplines to ensure compliance to NLNG Asset Information.
• Management procedures, standards and formats.

Duties & Responsibilities

• Plan the implementation and close out of:
  • As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from NLNG departments and sections.
  • Supervises in the conversion to native files of NLNG Documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software,
• Produce technical drawings and documentation on AutoCAD to support NLNG activities as required from projects and discipline in accordance with NLNG Asset Information Management procedures and applicable standards.
• Coordinate in the preparation of technical designs for the draft works assigned the drawing office.
• Review drawings to ensure alignment with NLNG’s approved procedures, standards, templates and formats.
• Initiate improvements on NLNG CAD activities.
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into NLNG EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand.
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Manage the filing system for all CADed drawings on NLNG live link in accordance to the file naming convention
• Collate all reports from various disciplines for tasks assigned to the drawing office in an accurate and timely fashion.
• Keep abreast changes to procedures, work instructions and control systems related to the function of drawing office and cascade to direct reports
• Carry out all other activities assigned by Supervisor and Line Head.

Job Requirements
Education:

• HND/B.Sc. or its equivalent in the relevant Engineering discipline is required for the job.

Experience:

• 12 years post graduate experience in the field of CAD and Design works, with a minimum of 6 years experienced on a similar position in the oil and gas sector.
• Experience shall also include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.

 

Job Title: Principal Planning Engineer

Location: Bonny Island, Rivers

Job Purpose / Objective

• The successful candidate would be required to develop, manage and maintain centralized planning and scheduling system for the overall Client’s CAPEX Projects Portfolio that will ensure effective schedule control, facilitate project delivery within established targets and provide key information for management reporting to achieve Departmental KPI’s.

Main Accountabilities

• Provide project management support in the development of the Client’s Projects Portfolio activities, resources planning leading to the creation of the Overall Project Portfolio baseline schedule including
• Schedule Basis documents and its subsequent maintenance to achieve schedule performance.
• Maintain the overall Project Portfolio Schedule at levels 1 to 4 required to develop and execute each approved project in their hierarchy relationship to meet the Client’s projects’ requirements.
• Develop and update the planning and schedule procedures to ensure sustainable and continuous improvements in line with the Client’s Quality Management System requirements.
• Execute schedule control activities to monitor physical progress against key deliverables and track trends on schedule over-run and under-run to identify timely corrective actions for the achievement of schedule performance targets.
• Provide input to monthly progress updates; forecast completions, together with the critical path and trend analysis as input to management reporting to reflect how Client’s project objectives are being achieved.
• Evaluate bid schedules and review contractor execution plan and develop the key milestone dates for critical projects for alignment with the overall integrated Project Portfolio Schedule.
• Verify that the contractors reported progress is correct and accurately reflected including Milestone Performance in the overall Project Portfolio integrated schedule for accurate management reporting.
• Enhance Schedule Visibility by regular interaction with project team to bring clarity around schedule, and schedule performance including progress variance analysis.
• Review scope change requests for the impact on schedules and the critical path of the project and prepare reconciliations between earlier schedules and the current schedule and provide schedule impact assessments to change control process for accurate progress monitoring.
• Perform risk and sensitivity analysis on project schedule or critical path analysis and evaluate impact on overall Project portfolio plan.
• Ensure Benchmarking data are captured in company’s central pool of Benchmarking information bank including Productivity Norms and same are used to enhance schedule robustness.

Job Requirements
Education:

• A University Degree in Engineering

Experience:

• 12 years post-graduate experience, of which at least 8 years in a planning role in the oil and gas industry.
• An understanding of contracting strategy, project optimization processes, construction constraints are prerequisites for the job.
• Extensive skills in the use of the Primavera P6 planning tool is mandatory.
• Ability to work across cultural boundaries.

Preferred:

• Experience with qualitative modelling techniques and tools (Primavera Risk Analysis or similar.

 

Job Title: Senior Design Engineer – Instrumentation

Location: Port Harcourt, Rivers

Job Purpose / Objectives

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the instrumentation engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering the instrumentation and process control engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of top-quartile, competitive and affordable projects
• Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation and protection
• Ensure all Instrumentation (Process control and automation) engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects
• Carry out instrumentation design reviews on third party design packages including, BDP, FEED, Detailed Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
• Provide support for instrumentation engineering studies and change impact analysis as part of the Management of Change (MOC) procedure. Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• A University Degree in Electrical Engineering or similar.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design, construction and maintenance.
• At least 4 years should have been spent leading instrumentation engineering design.

Other Job Requirements:
Key Considerations:

• Analytical: Ability to accurately evaluate detailed specifications particularly geared towards cost minimization without compromising other resource elements such as safety and quality
• Technical Skills: Job would require a detailed knowledge of current and evolving technologies on High Voltage power generation, distribution and switching systems. Detailed knowledge of industry processes, construction sequences, materials and procurement processes are required.
• Detailed oriented: must be meticulous and pay attention to details.
• Verbal and written communication skills: Ability to seamlessly communicate and write comprehensive reports for monitoring, tracking and to support decision making
• Support internal and external Audits.

 

Job Title: Senior CAD Designer – Civil

Location: Bonny Island, Rivers

Job Purpose / Objective

• Manage the Civil activities; 2D drawings & 3D models for PDRs & SECs in the TEA Drawing Office. Ensure that all field verification works are carried out in a safe and efficient way.
• Supports the outputs of other disciplines to ensure compliance to NLNG Asset Information Management procedures, standards and formats.

Duties & Responsibilities

• Supervise the execution and close out of:
  • As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from NLNG departments and sections.
  • Participate in the conversion to native files of NLNG Documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software.
• Produce technical drawings and documentation on AutoCAD to support NLNG activities as required from projects and discipline in accordance with NLNG Asset Information Management procedures and applicable standards.
• Supervise in the preparation of technical designs for the draft works assigned.
• Review drawings to ensure alignment with NLNG’s approved procedures and applicable standards.
• Propose improvements and initiatives on NLNG CAD activities.
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into NLNG EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand.
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Ensure all CADed drawings are saved on NLNG Livelink in accordance to the file naming convention
• Compile appropriate reports as required for specific assigned tasks in an accurate and timely fashion.
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of CAD designer
• Develop weekly report to team lead on work progress
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of CAD Designer.
• Carry out all other activities assigned by the Lead CAD Designer.

Job Requirements
Education:

• HND / B.Sc or equivalent in any Engineering discipline preferably Civil Engineering.

Experience:

• 7 years post graduate experience in the field of CAD and Design works, with a minimum of 5 years experienced on a similar position in the oil and gas sector.
• Experience shall also include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.

 

Job Title: Senior Design Engineer – Civil / Structural

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the civil/structural engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering the civil/structural engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects expectation
• Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
• Ensure all civil/structural engineering discipline requirements and inputs are made into Project documents such as BfD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the projects organization and responsible for the relevant discipline deliverables plan for projects. Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design Drawings as may be required for specific projects
• Carry out civil/structural design reviews on third party design packages including, BDP, FEED, Detailed
• Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
• Provide support for civil/structural engineering studies and change impact analysis as part of the Management of Change (MOC) procedure.
• Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation

Job Requirements
Education:

• A University Degree in Civil/Structural Engineering.

Experience

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design and construction. At least 4 years should have been spent leading civil engineering design work.

Other Job Requirements:
Key Considerations:

• Analytical: Ability to accurately evaluate detailed specifications particularly geared towards cost minimization without compromising other resource elements such as safety and quality
• Technical Skills: Job would require frequent visits to construction sites and other field/offsite locations.
• Detailed knowledge of industry processes, construction sequences, materials and procurement processes are required.
• Detailed oriented: must be meticulous and pay attention to details.
• Verbal and written communication skills: Ability to seamlessly communicate and write comprehensive reports for monitoring, tracking and to support decision making
• Supporting and leading in internal and external Audits.

 

Job Title: Senior CAD Designer – Mechanical / Piping

Location: Bonny Island, Rivers

Job Purpose / Objective

• Participate in the activities of TEA Drawing Office; including update of Mechanical & Piping 2D drawings & 3D models for PDRs & SECs.
• Ensure that all field verification works are carried out in a safe and efficient way
• Supports the outputs of other disciplines to ensure compliance to NLNG Asset Information Management procedures, standards and formats.

Duties & Responsibilities

• Participate in the execution and close out of:
  • As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from NLNG departments and sections.
• Actively participate in the conversion to native files of NLNG Documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software,
• Produce technical drawings and documentation on AutoCAD to support NLNG activities as required from projects and discipline in accordance with NLNG Asset Information Management procedures and applicable standards.
• Assist in the preparation of technical designs for the draft works assigned.
• Review drawings to ensure alignment with NLNG’s approved procedures and applicable standards.
• Propose improvements and initiatives on NLNG CAD activities.
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into NLNG EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand.
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Ensure all CADed drawings are saved on NLNG livelink in accordance to the file naming convention
• Compile appropriate reports as required for specific assigned tasks in an accurate and timely fashion.
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of drawing office
• Send weekly report to team lead on work progress
• Carry out all other activities assigned by supervisor and Line head.

Job Requirements
Education:

• HND/B.Sc or equivalent in any Engineering discipline preferably Mechanical Engineering.

Experience:

• Minimum of 7 years’ experience in CAD and design works for the oil and gas industry,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

 

Job Title: Senior Risk Engineer

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To operate the Risk Management process and tools for client CAPEX projects in order to achieve effective implementation of risk and opportunity management in all project phases.

Main Accountabilities

• Implement the project risk management process: risk identification and assessment; risk quantification and prioritization; risk response planning and implementation, risk information records; risk monitoring and control.
• Support the regular health assessment of the project risk management process.
• Coordinate and (when necessary) facilitate risk management events such as risk workshops and risk review meetings with the participation of all key stakeholders.
• Carry out qualitative and quantitative risk analysis on projects: integrate input from the risk register, cost estimate and schedule into deterministic and probabilistic risk analyses to provide final cost and schedule range estimates.
• Update the project risk database, including the addition of new risks, tracking risk response actions and reporting on risk KPIs.

Job Requirements
Education:

• A University Degree in Engineering.

Experience:

• 7 years post-graduation experience in a core project function (project engineering, construction, project services or front-end development), preferably in the Oil and Gas industry.
• Experience of Project Risk Register creation and maintenance.

Preferred:

• Experience with qualitative modelling techniques and tools (Primavera Risk Analysis, @risk etc.).
• Certified qualification with respect to Risk Management systems and tools.

 

Job Title: Cost Estimator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide Company with cost management services including preparation of cost estimates and post projects contract cost management support to aid management make informed decisions at various value assurance gates, minimize successful contractual claims, achieve value for money, contribute to company’s good corporate image, meet projects objectives and ultimately contribute to achievement of Cost Leadership in the management of PD CAPEX projects and budget.

Main Accountabilities

• Produce timely and quality cost estimates for CAPEX budget planning, project screening and investment decisions in line with Departmental Key Performance Indicators (KPIs) to achieve value for money and Cost
• Leadership for CAPEX Projects.
• Identify & Assess prospect scope and main components to develop consistent “building block” estimates (Type1-2) for each concept under consideration.
• Translate the identified project scope and engineering deliverables into the estimate of capital expenditure costs for design, procurement, construction, installation, commissioning and start-up of the hardware elements (Type-3). Estimate composed of detailed MTOs matched with detailed pricing and construction unit hours.
• Identify areas of uncertainty and apply appropriate allowances.
• Development of detailed project cost estimate (Type-4). Incorporation of project actuals to date and detailed
• MTOs matched with detailed pricing and construction unit hours for to-go costs.
• Develop Estimate Basis to document how estimate was developed.
• Provide input to Probabilistic Cost & Schedule Risk Analysis
• Contribute to Estimating Data- Collect actual cost performance and benchmarking information.
• Perform uncertainty analysis and sensitivities on cost estimates, reflecting analysis of project risks.

Job Requirements
Education:

• A recognised Engineering / Tech Degree in a relevant discipline is required for the job.
• Certification as a Cost Estimator will be an added advantage.

Experience:

• Minimum of 5 years post graduation experience, 3 of which should be in estimator positions in either project engineering /design / construction or project services activities in the Oil and Gas industry.
• Knowledge of Cost Estimating principles, techniques, and industry standard tools (AACEi).

 

Job Title: Project Portfolio Analyst

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide effective Project Administrative support for the PD CAPEX project portfolio by providing effective information management and compliance with NLNG Project Governance process to contribute to the successful execution of CAPEX projects for the realization of NLNG business objectives.

Main Accountabilities

• Perform quality compliance checks on Project Development Requests (PDR) packages for
• presentation to the various governance Meetings (Weekly DRB, weekly Project Portfolio and Monthly Project Review Meetings) ensure adequate compliance to submission deadlines for excellence processing of PDR packages.
• Participate in the preparation of the yearly CAPEX budget with 5 years look ahead in line with the Budget preparation procedure and Budget reviews as required.
• Administer project governance processes and procedures including administering meetings for the Governance forums to ensure timely review and approval of Project proposals via the appropriate decision gates thereby ensuring assurance and compliance with the NLNG project management process.
• Manage the archiving and retrieval of hard and soft copy project documentation (SAP, Livelink) to ensure effective Project Information Management systems.
• Continuously update projects information in SAP to ensure the accuracy of data in the PD CAPEX Projects Portfolio is maintained and action SAP requests as required.
• Provide Project Assurance support for the PD CAPEX projects across the three main Portfolios (i.e. Plant, Infrastructure and Pipeline/GTS in contribution to the delivery of projects on time and within Budget.
• Act as Nigerian Content Focal person for ensuring adequate awareness on Nigerian content requirements and tracking Nigerian Content deployment on projects thereby leading to improved compliance with Nigerian content requirements on PD CAPEX projects.
• Prepare periodic Projects reports associated with PD CAPEX projects and issue same within the agreed timelines to ensure continuous control of Projects in alignment with Company’s business objectives.
• Develop and update project management, project controls and reporting procedures as required and ensure compliance with these procedures during project implementation to achieve and sustain effective project governance and control for the PD CAPEX Projects Portfolio.

Job Requirements
Education:

• B.Sc Degree in an Engineering Discipline.

Experience:

• 3 – 5 years post-graduation experience out of which minimum of 2 years should be in either Project Engineering or Project Assurance/Services function within the oil and gas industry.

 

Job Title: Project Controls Engineer

Location: Bonny Island, Rivers

Job Purpose / Objective

• To implement and maintain effective project control processes, management frameworks, standards, procedures and systems, thereby contributing to the achievement centralized cost, planning and scheduling
  objectives of the Project Delivery Department.

Main Accountabilities

• Maintain database to support Project Cost Planning, VOWD, Accruals, Forecasts, Cost & schedule performance Indicators.
• Provide cost and schedule data to support preparation of yearly CAPEX budgets with 5 years look ahead in line with the Budget preparation procedure and participate in Budget reviews as required.
• Development of detailed project cost estimate (Type – 4) to support changes on existing projects.
• Incorporation of project actuals to date and detailed MTOs matched with detailed pricing for Estimate at Completion.
• Ability to use existing Project Controls Tools such as MS Excel, EcoSys, Primavera P6, SAP ERP, Lumira and Power BI to deliver reports and dashboards on Project Performance.
• Co-ordinate timely budget virement process with contract holders and provide timely project reports as required.
• Develop and agree valuation schedules and implement valuation of project work done, prepare payment certificates for all Medium CAPEX Projects.
• Contribute to projects change management process by analyzing trends and computing potential change impact on project cost & schedule and advise project leaders, as necessary.
• Coordinate the recovery of manpower costs to projects using approved templates for effective capitalization.

Job Requirements
Education:

• A University Degree in Engineering or Construction Management.

Experience:

• Minimum of 5 years post-graduation experience in Project Controls/Cost Estimation role with 3 years in a role for portfolio of projects and good knowledge of the Oil and Gas industry.
• Knowledge of Cost Estimating principles, techniques, and industry standard tools.

 

Job Title: Senior Project Controls Engineer

Location: Bonny Island, Rivers

Job Purpose / Objective

• To implement and maintain effective project control processes, management frameworks, standards, procedures and systems, thereby contributing to the achievement centralized cost, planning and scheduling
  objectives of the Project Delivery Department.

Main Accountabilities

• Maintain database to support Project Cost Planning, VOWD, Accruals, Forecasts, Cost & schedule performance Indicators.
• Provide cost and schedule data to support preparation of yearly CAPEX budgets with 5 years look ahead in line with the Budget preparation procedure and participate in Budget reviews as required.
• Development of detailed project cost estimate (Type – 4) to support changes on existing projects.
• Incorporation of project actuals to date and detailed MTOs matched with detailed pricing for Estimate at Completion.
• Ability to use existing Project Controls Tools such as MS Excel, EcoSys, Primavera P6, SAP ERP, Lumira and Power BI to deliver reports and dashboards on Project Performance.
• Co-ordinate timely budget virement process with contract holders and provide timely project reports as required.
• Develop and agree valuation schedules and implement valuation of project work done, prepare payment certificates for all Medium CAPEX Projects.
• Contribute to projects change management process by analyzing trends and computing potential change impact on project cost & schedule and advise project leaders, as necessary.
• Coordinate the recovery of manpower costs to projects using approved templates for effective capitalization.

Job Requirements
Education:

• A University Degree in Engineering or Construction Management.

Experience:

• Minimum of 7 years post-graduation experience in Project Controls/Cost Estimation role with 5 years in a role for portfolio of projects and good knowledge of the Oil and Gas industry.
• Knowledge of Cost Estimating principles, techniques, and industry standard tools.

 

Job Title: Principal Portfolio Analyst

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Responsible for the day-to-day operation and effective administration of the portfolio processes.
• Providing accurate decision-making analysis through synergetic stakeholder engagement and compliance with approved NLNG Project Portfolio Management process to contribute to the successful execution of CAPEX projects for the realization of NLNG business objectives.

Main Accountabilities

• Responsible for all portfolio management records keeping and archiving.
• Initiates and coordinates all portfolio analysis activities (including for Project Prioritization, FTE planning, Value and Portfolio Risk Analysis) and reports accordingly to the Portfolio Manager.
• Responsible for organizing and coordinating the various forums/sessions for all events in the annual Portfolio Planning Calendar and all the portfolio management events for both the Front-End and Project Delivery Portfolios and across all Sub-Portfolios (i.e. Plant, Infrastructure, Pipeline/GTS and Community).
• Updates and ensures the accuracy of the portfolio management templates, forms, checklists etc. required for the performance of all the portfolio management activities.
• Acts as the secretary to the portfolio Decision Review Board (DRB) and ensures accuracy and completeness of portfolio related submissions (including reports) to the portfolio DRB.
• Prepares periodic portfolio performance/status reports for the Portfolio Manager and Portfolio Sponsor.
• Responsible for maintaining an accurate portfolio database, in collaboration with Portfolio Leads.
• Maintains a Five-year CAPEX demand forecast.
• Maintains a Five-year FTE demand forecast.
• Maintains a Project Portfolio Value Summary database.
• Responsible for managing the Portfolio Planning Calendar and all the portfolio management events for both the.
• Front-End and Project Delivery Portfolios and across all Sub-Portfolios (i.e. Plant, Infrastructure, Pipeline/GTS and Community)

Job Requirements
Education:

• A University Degree in Engineering, Statistics or Economics.

Experience:

• Minimum 10 years industry experience in Project Services or Project Management roles. With at least 5 years’ experience on Brownfield Portfolio projects.

Other Job Requirement:

• Participate in the change to high quality, top quartile project delivery team in NLNG.

 

Job Title: Senior CAD Designer II – Mechanical / Piping

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The CAD Designer supports the Lead and Design Engineers in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• The CAD Designer is ultimately responsible for engineering drafting and modelling of designs within the team and ensures that the engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering CAE (computer aided engineering)/CAD (computer aided design) applications for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects execution
• Responsible for Company asset 2D/3D/4D modelling and consistency checks in projects
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Work closely with Lead and Senior Design Engineers to resolve any existing or forecasted problems related to drafting quality in design or productivity. Carry out consistency checks on drawings, models etc.
• Apply Company specifications and design manuals in line with the PMF/DCAF to deliver project intents in engineering deliverables CAD and modelling.
• Ensure all engineering discipline requirements and CAD inputs are made into Project documents such as BfD, BDP, BDEP, PES, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant deliverables plan for projects.
• Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate drafting reviews and assurance on projects.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• HND / B.Sc in any Engineering fields or related courses with CAD Training experience.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design and construction. At least 5 years should have been spent leading engineering modelling & CAD design work

 

Job Title: CAD Designer – Electrical & Instrumentation

Location: Port Harcourt, Rivers

Job Objective

• Participate in the activities of TEA drawing office; including update of Electrical & Instrumentation 2D drawings & 3D models for PDRs & SECs. Ensure that all field verification works are carried out in a safe and efficient way
• Supports the outputs of other disciplines to ensure compliance to client’s Asset Information Management procedures, standards and formats.

Duties & Responsibilities

• Participate in the execution and close out of: o As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from client’s departments and sections.
• Actively participate in the conversion to native files of Client’s Documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software,
• Produce technical drawings and documentation on AutoCAD to support client’s activities as required from projects and discipline in accordance with client’s Asset Information Management procedures and applicable standards.
• Assist in the preparation of technical designs for the draft works assigned.
• Review drawings to ensure alignment with client’s approved procedures and applicable standards.
• Propose improvements and initiatives on client’s CAD activities
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into client’s EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Ensure all CADed drawings are saved on client’s Livelink in accordance to the file naming convention
• Compile appropriate reports as required for specific assigned tasks in an accurate and timely fashion.
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of drawing office
• Send weekly report to team lead on work progress
• Carry out all other activities assigned by Supervisor and Lead CAD Designer.

Job Requirements
Education:

• HND/B.Sc or equivalent in any Engineering discipline preferably Electrical Engineering.

Experience:

• Minimum of 5 years’ experience in CAD and design works for the oil and gas industry,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

 

Job Title: Planning Engineer

Location: Bonny Island, Rivers

Job Purpose / Objective

• To deliver and maintain standard, consistent and realistic project plans reflecting the assessed risk parameters for Capex Projects to ensure effective project delivery within budget and schedule.

Main Accountabilities

• Provide project management support in the development of the portfolio project activities, logic, resources and progress of the integrated project schedule, leading to the creation of the overall
• Project portfolio baseline schedule and its subsequent maintenance.
• Develop and maintain the overall Project Portfolio Plan at levels 1 to 4 required to develop and execute each approved project in their hierarchy relationship and update the planning and progress measurement and monitoring procedures so each element of the project performs the processes consistently.
• Schedule control activities to monitor physical progress against key deliverables and track trends on schedule over-run and under-run and use such trend information to identify timely corrective actions to maintain schedule; prepare risk and sensitivity analysis on project schedule or critical path analysis for evaluation of impact on overall Project portfolio plan.
• Provide monthly progress updates, forecast completions, together with the critical path and trend analysis to ensure timely and accurate information are available to the delivery groups.
• Assess the impact of approved changes and any deviations from the key project targets and milestones, including productivity monitoring and What if scenarios to aid project management decision-making.
• Evaluate bid schedules and review contractor execution plan and develop the key milestone dates for critical projects for alignment with the overall integrated Project portfolio plan. Verify that the contractors reported progress is correct and accurately reflected in the overall Project portfolio integrated plan.
• Evaluate scope change requests for the impact on schedules and the critical path of the project.
• Prepare reconciliations between earlier schedules and the current schedule and provide schedule impact assessments to change control process
• Establish probabilistic techniques to determine and continuously communicate the possible range of schedule completion dates for the project with the inclusion of tracking schedule risk mitigation efforts, the criticality of the main paths to completion, float consumption and the release of the 50/50 schedule contingency to ensure timely completion of Projects
• Analyze company schedules and capture benchmarking information from schedules of projects previously executed to maintain a pool of benchmarking data.

Job Requirements
Education:

• A University Degree in Engineering or Sciences or any other certification is required for the job.

Experience:

• 5 years post graduate experience, out of which 3 years should have been spent in a project planning position in a reputable organization preferably an Oil & Gas company

Other Job Requirements:

• An understanding of contracting strategy, project optimization processes, construction constraints are a prerequisite for the job
• Responsibilities for coaching and mentoring of Project Services Engineers to improve competencies in project delivery.

 

Job Title: Design Engineer – Civil / Structural

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the civil/structural engineering design for the assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error-free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering the civil/structural engineering design packages for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects expectation
• Apply the relevant project and engineering procedures in line with the PMF/DCAF to deliver the appropriate engineering and design requirements and ensure value creation, maturation and protection within the engineering design space.
• Ensure all civil/structural engineering discipline requirements and inputs are made into Project documents such as BFD, BDP, BDEP, PES, PEP, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as the technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects. Liaise with Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Carry out and perform basic and detailed design and engineering work: Design Calculations, Simulations, Work scope definition, Project Specifications, selection of standards, Preliminary Design
• Drawings as may be required for specific projects
• Carry out civil/structural design reviews on third party design packages including, BDP, FEED, Detailed
• Design to ensure compliance of the deliverables with provisions of the applicable Design standards and specifications as part of the overall project quality assurance program.
• Provide support for civil/structural engineering studies and change impact analysis as part of the Management of Change (MOC) procedure.
• Review and advise on Construction Technical Queries (CTQ) and mitigate actual and potential impacts on project philosophy and existing design
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• A University Degree in Civil / Structural Engineering.

Experience:

• Extensive experience 5 years in the Oil & Gas industry with direct experience in project engineering, design and construction.
• At least 3 years should have been spent leading civil engineering design work.

Other Job Requirements:
Key Considerations:
Analytical:

• Ability to accurately evaluate detailed specifications particularly geared towards cost minimization without compromising other resource elements such as safety and quality

Technical Skills:

• The job would require frequent visits to construction sites and other fields/offsite locations.
• Detailed knowledge of industry processes, construction sequences, materials and procurement processes are required.

Detailed Oriented:

• Must be meticulous and pay attention to details.
• Verbal and written communication skills: Ability to seamlessly communicate and write comprehensive reports for monitoring, tracking and supporting decision making
• Supporting and leading in internal and external Audits.

 

Job Title: CAD Designer – Mechanical / Piping

Location: Port Harcourt, Rivers

Job Objective(s)

• Participate in the activities of TEA Drawing Office, including update of Mechanical & Piping 2D drawings & 3D models for PDRs & SECs. Ensure that all field verification works are carried out in a safe and efficient way.
• Supports the outputs of other disciplines to ensure compliance to Client’s Asset Information Management procedures, standards and formats.

Duties & Responsibilities

• Participate in the execution and close out of:
  • As built redlined PDR and SEC
  • Upgrading of documents,
  • Drafting / design request from client’s departments and sections.
• Actively participate in the conversion to native files of Client’s documents types and incorporate plant change information resulting from project activities using AutoCAD, MicroStation, GTXRaster CAD and Microsoft Office software,
• Produce technical drawings and documentation on AutoCAD to support client’s activities as required from projects and discipline in accordance with client’s Asset Information Management procedures and applicable standards.
• Assist in the preparation of technical designs for the draft works assigned.
• Review drawings to ensure alignment with client’s approved procedures and applicable standards.
• Propose improvements and initiatives on client’s CAD activities.
• Incorporate as-built information on assigned drawings and related drawings in a controlled manner and upload into client’s EDMS within the specified duration.
• Maintain proper electronic filing system including revision control for all documents and drawings in hand.
• Transfer non-standard file formats into the standardized formats ensuring uniform and complete information
• Ensure all CADed drawings are saved on client’s livelink in accordance to the file naming convention
• Compile appropriate reports as required for specific assigned tasks in an accurate and timely fashion.
• Keep abreast of changes to operating procedures, work instructions and control systems related to the function of drawing office
• Send weekly report to team lead on work progress
• Carry out all other activities assigned by supervisor and Line head.

Job Requirements
Education:

• HND/B.Sc or equivalent in any Engineering discipline preferably Mechanical Engineering.

Experience:

• Minimum of 5 years’ experience in CAD and design works for the oil and gas industry,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

 

Job Title: Senior Project Engineer – Front End

Location: Port Harcourt, Rivers

Job Objective

• The purpose of the position is to support the integration of projects across the Front-end and Execution phases to ensure a seamless transition and achieve Best-Practical Front-End loading at FID

Main Accountabilities

• Provide primary coordination and support the interface between the Front end and Execution for Brownfield capital projects ensuring an integrated and consistent approach on all portfolio projects to ensure competitive and affordable projects are delivered.
• Support and coordinate project execution input in the Assess and Select phases and ensure a robust Basis for Design, Project Execution strategy delivered for execution including contracting and procurement, schedule and cost estimates, and risk management strategies.
• Coordinate requirements from key stakeholders to ensure that they are understood and incorporated in the project scope and execution planning, including regulatory, business, constructability for the project execution is firm and detailed enough to support effective project control and implementation during the Execution Phase.
• Actively promote the deployment of the Project Management Framework principles and best practices as well as Brownfield Practices & Tools, and manages to obtain buy in from external stakeholders
• Ensure that the HSE execution strategy for all projects is robust and effective and personally be accountable for Goal Zero
• Ensure that projects have clear competitive and defined scope and that the scope is frozen during the Select phase and with no growth during Define. Ensure that all projects in select are subjected to robust value challenge and competitive scoping reviews as appropriate and support the front-end team to achieve scoped up better and quicker compared to the past.
• Provide continuing technical support to the execution teams during the Define Phase to ensure there is no value erosion.

Job Requirement
Education:

• A University Degree in Engineering

Experience:

• 5 – 7 years post-graduation experience with minimum 3 years project management experience working across Front end and Execution roles projects.

 

Job Title: Risk Management Engineer

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To operate the Risk Management process and tools for client CAPEX projects in order to achieve effective implementation of risk and opportunity management in all project phases.

Main Accountabilities

• Implement the project risk management process: risk identification and assessment; risk quantification and prioritization; risk response planning and implementation, risk information records; risk monitoring and control.
• Support the regular health assessment of the project risk management process.
• Coordinate and (when necessary) facilitate risk management events such as risk workshops and risk review meetings with the participation of all key stakeholders.
• Carry out qualitative and quantitative risk analysis on projects: integrate input from the risk register, cost estimate and schedule into deterministic and probabilistic risk analyses to provide final cost and schedule range estimates.
• Update the project risk database, including the addition of new risks, tracking risk response actions and reporting on risk KPIs.

Job Requirements
Education:

• A University Degree in Engineering.

Experience:

• 3 – 5 years post-graduation experience in a core project function (project engineering, construction, project services or front-end development), preferably in the Oil and Gas industry.
• Experience of Project Risk Register creation and maintenance.

Preferred:

• Experience with qualitative modelling techniques and tools (Primavera Risk Analysis, @risk etc.).
• Certified qualification with respect to Risk Management systems and tools.

 

Job Title: Senior Planning Engineer

Location: Bonny Island, Rivers

Job Purpose / Objective

• To deliver and maintain standard, consistent and realistic project plans to reflect the assessed risk parameters for Capex Projects to ensure effective project delivery within budget and schedule.

Main Accountabilities

• Provide project management support in the development of the portfolio project activities, logic, resources and progress of the integrated project schedule, leading to the creation of the overall
• Project portfolio baseline schedule and its subsequent maintenance.
• Develop and maintain the overall Project Portfolio Plan at levels 1 to 4 required to develop and execute each approved project in their hierarchy relationship and update the planning and progress measurement and monitoring procedures so each element of the project performs the processes consistently.
• Schedule control activities to monitor physical progress against key deliverables and track trends on schedule over-run and under-run and use such trend information to identify timely corrective actions to maintain schedule; prepare risk and sensitivity analysis on project schedule or critical path analysis for evaluation of impact on overall Project portfolio plan.
• Provide monthly progress updates, forecast completions, together with the critical path and trend analysis to ensure timely and accurate information are available to the delivery groups.
• Assess the impact of approved changes and any deviations from the key project targets and milestones, including productivity monitoring and What if scenarios to aid project management decision-making.
• Evaluate bid schedules and review contractor execution plan and develop the key milestone dates for critical projects for alignment with the overall integrated Project portfolio plan. Verify that the contractors reported progress is correct and accurately reflected in the overall Project portfolio integrated plan.
• Evaluate scope change requests for the impact on schedules and the critical path of the project.
• Prepare reconciliations between earlier schedules and the current schedule and provide schedule impact assessments to change the control process
• Establish probabilistic techniques to determine and continuously communicate the possible range of schedule completion dates for the project with the inclusion of tracking schedule risk mitigation efforts, the criticality of the main paths to completion, float consumption and the release of the 50/50 schedule contingency to ensure timely completion of Projects
• Collect the benchmarking data and productivity Norms from the company schedules and feed them to the company benchmarking system and use the same to ensure schedule robustness.

Job Requirements
Education:

• A University Degree in Engineering or Sciences or any other certification is required for the job.

Experience:

• 7 years post-graduate experience, out of which 5 years should have been spent in a project planning position in a reputable organization preferably an Oil & Gas company.

Other Job Requirements:

• An understanding of contracting strategy, project optimization processes, construction constraints are a prerequisite for the job
• Responsibilities for coaching and mentoring of Project Services Engineers to improve competencies in project delivery.

 

Job Title: Senior Design Engineer – Process

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The Design Engineer supports the Lead Design Engineer in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• Ensures that the process engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Provide timely and pro-active technology supports for integration of projects covering Masterplans for process, utility, plot layout, product evacuation and gas supply; Reviews and audits with respect to consistency and integrity at the interfaces; Development studies with various SMEs for growth projects; Review, ensure and maintain quality of a critical process safety document – Process Engineering Flow Schemes (PEFS); Plant modifications related to the project interfaces prior to Management approval to ensure operational integrity of the process plant
• Review of all technical integration input for process and utilities projects, including quality control of deliverables, whilst meeting process technical safety assurance, to ensure the quality and technical integrity of new installations by maintaining minimum required codes; applying requisite design criteria and standards as prescribed by NLNG/Shell DEP and best practice in the industry; and applying strategies that aim for minimum life cycle costs
• Provide process & utilities technological support to assure the quality of in-house process technical safety risk assessments as applied by TA in the execution and quality assurance of utilities and process technical safety reviews (HAZOP, PSSR, etc) for plant changes and third-party projects integration, ESP, AI-PSM and Bow-tie development in conjunction with the other discipline NLNG TAs.
• Provide process engineering support to achieve maximum profit for NLNG through evaluating energy efficiency, production capacity, and process reliability of new plant projects, expansion projects and Third-Party Projects deliverables plan for projects. Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate technical assurance on projects.
• Demonstrate HSSE Leadership, champion Production Risks and Process Safety accountabilities in implementation, execution and management of process & utilities integration support with new plant projects, growth projects and
• Third-Party Projects. Drive the review of and learnings from proactive observations and incidents
• Review vendor documentation to ensure compliance with requisite standards, codes and regulations for integration within the project design. Provide input for equipment selection and integration, implement best practices for integration of equipment within a modularisation philosophy including inspection/commissioning/testing related to commissioning, start-up and integration of new facilities
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation

Job Requirements
Education:

• A University Degree in Chemical Engineering or other Engineering / Science discipline.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design, construction and maintenance. At least 5 years should have been spent on Process Engineering experience in the oil and gas industry.

Other Job Requirements
Key Considerations:

• Analytical: Ability to accurately evaluate detailed specifications particularly geared towards cost minimization without compromising other resource elements such as safety and quality
• Technical Skills: Job would require a detailed knowledge of current and evolving technologies on High Voltage power generation, distribution and switching systems. Detailed knowledge of industry processes, construction sequences, materials and procurement processes are required.
• Detailed oriented: must be meticulous and pay attention to details.
• Verbal and written communication skills: Ability to seamlessly communicate and write comprehensive reports for monitoring, tracking and to support decision making
• Supporting and leading in internal and external Audits.

 

Job Title: Senior Data Analyst I

Location: Bonny Island, Rivers

Job Purpose / Objective

• To establish data and documents relations in PACER-D to enable easy search for the information loaded.
• To ensure NLNG hard copy documents and drawings are captured in PACER-D according to NLNG Facility Information Model/Asset Register, so that they are stored in a secured and efficient way for easy retrieval.

Duties & Responsibilities

• Develop and Manage database programs as the progress reporting tool.
• Analyze metadata and attributes of the documents / drawings not in PACER-D and prepare load files for upload into PACER-D
• Capture details of all hard copy documents in containers & cabin and cross check PACER to ensure documents and drawings are captured and uploaded into PACER-D
• Scan and register hardcopy engineering documents and drawings that are not in PACER-D or of higher revision to the existing one into PACER-D so they are stored in a secured and efficient way for easy retrieval.
• Manage the correct classification of document types and ensure document title conform with AIM convention
• For assigned documents execute following tasks:
  • Check suitability of hardcopy documents and drawings for storing in PACER-D; recommend actions when found unsuitable for the purpose.
  • Ensure latest revision of documents and drawings are clearly identified and available for users from PACER-D.
  • Maintain and file hard copies of documents and drawings which are superseding the old revision. Retain superseded documents/drawings on file in accordance with retention time requirements (as per STARDOM Procedures).
  • Retrieve and issue up-to-date documents/drawing only,
• Develop appropriate reports (Weekly, Monthly and completed Archive) as required on Capturing of Hardcopy Documents into EDMS project.
• Guide users in the correct usage of PACER-D for retrieving documents and drawings.
• Keep abreast of changes to operating procedures, work instructions and control systems related to data management.

Job Requirements
Education:

• HND / B.Sc preferably in an Engineering, Science disciplines or Business Administration.

Experience:

• 7 years post graduate experience, out of which 5 years should have been spent in a Data Management unit in the Oil & Gas sector.

 

Job Title: Senior Project Portfolio Administrator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide effective Project Administrative support for the PD CAPEX project portfolio by providing effective information management and compliance with NLNG Project Governance process to contribute to the successful execution of CAPEX projects for the realization of NLNG business objectives.

Main Accountabilities

• Perform quality compliance checks on Project Development Requests (PDR) packages for presentation to the various governance Meetings (Weekly DRB, weekly Project Portfolio and Monthly Project Review Meetings) ensure adequate compliance to submission deadlines for excellence processing of PDR packages.
• Participate in the preparation of the yearly CAPEX budget with 5 years look ahead in line with the Budget preparation procedure and Budget reviews as required.
• Administer project governance processes and procedures including administering meetings for the Governance forums to ensure timely review and approval of Project proposals via the appropriate decision gates thereby ensuring assurance and compliance with the NLNG project management process.
• Manage the archiving and retrieval of hard and soft copy project documentation (SAP, Livelink) to ensure effective Project Information Management systems.
• Continuously update projects information in SAP to ensure the accuracy of data in the PD CAPEX Projects Portfolio is maintained and action SAP requests as required.
• Provide Project Assurance support for the PD CAPEX projects across the three main Portfolios (i.e. Plant, Infrastructure and Pipeline/GTS in contribution to the delivery of projects on time and within Budget.
• Act as Nigerian Content Focal person for ensuring adequate awareness on Nigerian content requirements and tracking Nigerian Content deployment on projects thereby leading to improved compliance with Nigerian content requirements on PD CAPEX projects.
• Prepare periodic Projects reports associated with PD CAPEX projects and issue same within the agreed timelines to ensure continuous control of Projects in alignment with Company’s business objectives.
• Develop and update project management, project controls and reporting procedures as required and ensure compliance with these procedures during project implementation to achieve and sustain effective project governance and control for the PD CAPEX Projects Portfolio.

Job Requirements
Education:

• A University Degree in any of the relevant disciplines.

Experience:

• 7 years post-graduation experience out of which minimum of 5 years should be in either Project Assurance or Services function within the oil and gas industry.

 

Job Title: Senior CAD Designer II – Civil / Structural

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The CAD Designer supports the Lead and Design Engineers in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• The CAD Designer is ultimately responsible for engineering drafting and modelling of designs within the team and ensures that the engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering CAE (computer aided engineering)/CAD (computer aided design) applications for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects execution
• Responsible for Company asset 2D/3D/4D modelling and consistency checks in projects
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Work closely with Lead and Senior Design Engineers to resolve any existing or forecasted problems related to drafting quality in design or productivity. Carry out consistency checks on drawings, models etc.
• Apply Company specifications and design manuals in line with the PMF/DCAF to deliver project intents in engineering deliverables CAD and modelling.
• Ensure all engineering discipline requirements and CAD inputs are made into Project documents such as BfD, BDP, BDEP, PES, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects.
• Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate drafting reviews and assurance on projects.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• HND / B.Sc in any Engineering fields or related courses with CAD Training experience.

Experience:

• Extensive experience (7-10 years) in the Oil & Gas industry with direct experience of project engineering, design and construction. At least 5 years should have been spent leading engineering modelling & CAD design work

 

Job Title: Senior Project Document Coordinator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Support the Coordination of all technical documents and data across multiple projects and portfolios during its complete lifecycle; Development of routine Reports on Assai Performance; Support the team lead to ensure the identification and timely access to current and accurate documentation to help ensure project actions and decisions impacting Integrity are made using the correct information.

Main Accountabilities

• Support the implementation of effective and efficient work processes and procedures for document/data management. Involve in contractor and supplier engagement to ensure that information management requirements and procedures are understood and applied.
• Support in the definition of asset data requirement, process for submission, validation and feedback to contractors and suppliers and to deliver consistent and complete information for handover to owner/operator.
• Responsible for the completeness and correctness of metadata as part of contractor deliverables, and assurance of the validity of the Master Deliverables Register (MDR) & Asset Information Template (AIT).
• Responsible for managing and improving the numbering process for project documents, including correspondences, and the tracking of same in the necessary databases.
• Responsible for conversion of hard copy documents and records into digital forms.
• Responsible for updating the individual projects folders in Livelink/SharePoint, with emerging documents and records.

Job Requirements
Education:

• HND / B.Sc in Engineering, Sciences or Management.

Experience:

• 7 years post-graduation experience in document control in an oil and gas company.

 

Job Title: Senior Cost Estimator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide Company with cost management services including preparation of cost estimates and post projects contract cost management support to aid management make informed decisions at various value assurance gates, minimize successful contractual claims, achieve value for money, contribute to company’s good corporate image, meet projects objectives and ultimately contribute to achievement of Cost Leadership in the management of PD CAPEX projects and budget.

Main Accountabilities

• Produce timely and quality cost estimates for CAPEX budget planning, project screening and investment decisions in line with Departmental Key Performance Indicators (KPIs) to achieve value for money and Cost
• Leadership for CAPEX Projects.
• Identify & Assess prospect scope and main components to develop consistent “building block” estimates (Type1-2) for each concept under consideration.
• Translate the identified project scope and engineering deliverables into the estimate of capital expenditure costs for design, procurement, construction, installation, commissioning and start-up of the hardware elements (Type-3). Estimate composed of detailed MTOs matched with detailed pricing and construction unit hours.
• Identify areas of uncertainty and apply appropriate allowances.
• Development of detailed project cost estimate (Type-4). Incorporation of project actuals to date and detailed
• MTOs matched with detailed pricing and construction unit hours for to-go costs.
• Develop Estimate Basis to document how estimate was developed.
• Provide input to Probabilistic Cost & Schedule Risk Analysis
• Contribute to Estimating Data- Collect actual cost performance and benchmarking information.
• Perform uncertainty analysis and sensitivities on cost estimates, reflecting analysis of project risks.

Job Requirements
Education:

• A recognised Engineering / Tech Degree in a relevant discipline is required for the job.
• Certification as a Cost Estimator will be an added advantage.

Experience:

• Minimum of 10 years post graduation experience, 5 of which should be in estimator positions in either project engineering /design / construction or project services activities in the Oil and Gas industry.
• Knowledge of Cost Estimating principles, techniques, and industry standard tools (AACEi).

Job Title: Senior Data Analyst II

Location: Bonny Island, Rivers

Job Purpose / Objective

• To provide Engineering Data Management services for the Asset Information Management (AIM) for all corporate assets across all company locations to ensure safe performance and long-term integrity and quality of critical engineering data for plant and non-plant assets.

Duties & Responsibilities

• Gather reporting and analysis requirements and translate into reporting structures data models, including aggregate tables, relational and dimensional.
• Profile and analyze source data to determine the best reporting structures.
• Design and build data integration processes from internal and external source systems into the Enterprise Data Warehouse/Lake.
• Develop dashboards that brings out insight from data for data across the organization
• Develop and implement quality controls and departmental standards to ensure quality standards, organizational expectations, and regulatory requirements.
• Manage and optimize processes for data intake, validation, mining and engineering as well as modelling, visualization and communication deliverables.
• Develop use cases and data visualizations. Deliver value to the business from data analysis and document, catalogue, profile, cleanse and audit the data.
• Build, develop and maintain data models, reporting systems, data automation systems, dashboards and performance metrics support that support key business decisions.
• Lead cross-functional initiatives using advanced data modelling and analysis techniques to discover insights that will guide strategic decisions and uncover optimization opportunities.
• Provides business and technical expertise for the analytics process, tools, and applications for a business function or business unit.

Job Requirements
Education:

• HND / B.Sc preferably in an Engineering, Science disciplines or Business Administration.

Experience:

• 7 years post graduate experience, out of which 5 years should have been spent in a Data Management unit in the Oil & Gas sector.

 

Job Title: Data Analyst

Location: Port Harcourt, Rivers

Job Objectives

• To establish data and documents relations in PACER-D to enable easy search for the information loaded.
• To ensure NLNG hard copy documents and drawings are captured in PACER-D according to NLNG Facility Information Model/Asset Register, so that they are stored in a secured and efficient way for easy retrieval.

Duties & Responsibilities

• Develop and Manage database programs as the progress reporting tool.
• Analyze metadata and attributes of the documents / drawings not in PACER-D and prepare load files for upload into PACER-D
• Capture details of all hard copy documents in containers & cabin and cross check PACER to ensure documents and drawings are captured and uploaded into PACER-D
• Scan and register hardcopy engineering documents and drawings that are not in PACER-D or of higher revision to the existing one into PACER-D so they are stored in a secured and efficient way for easy retrieval.
• Manage the correct classification of document types and ensure document title conform with AIM convention
• For assigned documents execute following tasks:
  • Check suitability of hardcopy documents and drawings for storing in PACER-D; recommend actions when found unsuitable for the purpose.
  • Ensure latest revision of documents and drawings are clearly identified and available for users from PACER-D.
  • Maintain and file hard copies of documents and drawings which are superseding the old revision. Retain superseded documents/drawings on file in accordance with retention time requirements (as per STARDOM Procedures).
  • Retrieve and issue up-to-date documents/drawing only,
• Develop appropriate reports (Weekly, Monthly and completed Archive) as required on Capturing of Hardcopy Documents into EDMS project.
• Guide users in the correct usage of PACER-D for retrieving documents and drawings.
• Keep abreast of changes to operating procedures, work instructions and control systems related to data management.

Job Requirements
Education:

• HND / B.Sc preferably in an Engineering, Science disciplines or Business Administration.

Experience:

• 7 years post graduate experience, out of which 4 years should have been spent in a Data Management unit in the Oil & Gas sector.

 

Job Title: Contracts Specialist

Location: Bonny Island, Rivers

Job Purpose / Objective

• Coordinates the development and execution of Contract & Procurement Project plan and the management of the Design Engineering services for NLNG Projects (Infrastructure, ISB/OSB, Plant and Community) and the coordination of all external Project Call-Off Service contracts, to aid, and support efficiently, the NLNG Projects Delivery.
• Lead the implementation of category management opportunities and solutions to extract, unlock and maximise value in the business on a sustainable basis

Main Accountabilities

• Liaise with Project Managers/Engineers and Contracts Engineers, generate contracting and tendering strategies/plans to achieve the objectives of projects; establish and justify appropriate contract management strategies with a focus on cost reduction, strategic, complex construction and engineering contracts and thereafter execute the approved strategies.
• Collaborate with the CP function and Project Engineers to develop, tender, negotiate and award of all contracts for NLNG in the assigned Category with due regard to business needs, risks, process integrity, within the shortest possible lead time and with competent contractors/suppliers, addressing specific HSE, commercial, schedule and execution risks, to prevent contract overrun and overspend due to poor scope definition and creep.
• Ensure adherence to statutory requirements, including use of all mandated institutions / regulators such as NCMDB, NAFDAC etc, to ensure that only suitably qualified and technically competent national suppliers/ contractors are awarded contracts and purchase orders.
• Work with the relevant parties and stakeholders to issue contract documents post-award incorporating general and specific terms and conditions as applicable, liaising with legal and functional disciplines to resolve contractual qualifications.
• Support the detailed definition, execution and closeout of third party spend savings (TPSS), Cost Optimisation Reviews (COR) in the assigned Category, identify supply chain Opportunities proactively with clear demonstrated business case that identifies value and risks and ensure that claims, non-conformances, disputes, variations are eliminated/avoided to maximise value in the business. Maintain a log of all savings generated for own contracts and obtain validation of such savings.
• Drive strong commercial influence in thinking and behaviour of internal customers, Develop supporting tools/techniques, and train stakeholders in contract development and management to ensure continuous Improvement/Lean efforts are embedded in relevant contract management works and initiatives, internally and externally.
• Lead &execute operational initiatives with key contractors, including key negotiations to maximize value.
• Guide contract holders as value champions, deliver ‘contract holder’ and related CP capacity development programmes and facilitate regular Contract Holder networking forums to ensure collaboration and knowledge sharing in the business in line with NLNG 10Bs,

Education

• A University Degree preferably in Engineering, Business or Financial Management or any related discipline.
• Membership of The Chartered Institute of Purchasing and Supply (CIPS) UK or Nigeria, or Institute of Supply Management (ISM) US or equivalent at a diploma or certified level is an advantage.

Experience:

• 3 – 5 years post-graduate experience with a minimum of 2 years in contracting and procurement roles in a reputable organization (preferably in an industry involving maintenance, shutdowns, projects and facilities management) in an Oil& Gas company.
• Experience in LEAN and in CP SAP module will be added advantage.

 

Job Title: Scrum Coordinator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Deliver key products using agile principles, facilitates sprint planning, daily scrum meetings, prepares facilitates retrospectives, support successful delivery of various solutions/product backlog work items and driving cohesive agile practices across the enterprise.

Main Accountabilities

• Serves as servant leader for an Agile Team. Coach the team on Scrum, Kanban, and SAFe principles & practices.
• Help remove impediments. Plan and setup Agile Ceremonies – Sprint Planning, Daily Scrum, Retrospective, etc.
• Act as a servant leader including facilitation, situational awareness, and conflict resolution.
• Facilitate daily stand-ups, to monitor sprint progress
• Coach and mentor the business delivery team in agile frameworks and principles and fostering the team’s ability to self-organize
• Mediate conflicts to assist the team in making decisions
• Remove sprint road blocks and facilitate solution development with the team
• Supports a culture of continuous process improvement through sprint retrospectives and key indicators around team performance
• Ensures clear communication and organization of all strategic and business delivery team goals
• Promote transparency and team empowerment across teams.

Job Requirements
Education:

• A University Degree in Computer Sciences or Physical Sciences or Engineering; professional scrum master Certification qualifications will be an advantage.

Experience:

• 10 to 12 years post-graduation experience, out of which 5 years should be a similar role within the IT department or Digital function or R&D function of a reputable organization preferably Oil & Gas company.

 

Job Title: Senior Contracts Specialist

Location: Bonny Island, Rivers

Job Purpose / Objective

• To implement and ensure a very clear strategy for contracting and procurement in line with set policies and considering budgets and business priorities.
• To provide functional expertise and guidance to Portfolio Projects teams.
• Coordinates the development and execution of Contract & Procurement Project plan and the management of the Design Engineering services for NLNG Projects (Infrastructure, ISB/OSB, Plant and Community) and the coordination of all external Project Call-Off Service contracts, to aid, and support efficiently, the NLNG Projects Delivery.

Main Accountabilities

• Liaise with Project Managers/Engineers and Contracts Engineers, generate contracting and tendering strategies/plans to achieve the objectives of projects; establish and justify appropriate contract management strategies with a focus on cost reduction, strategic, complex construction and engineering contracts and thereafter execute the approved strategies.
• Collaborate with the CP function and Project Engineers to develop, tender, negotiate and award of all contracts for NLNG in the assigned Category with due regard to business needs, risks, process integrity, within the shortest possible lead time and with competent contractors/suppliers, addressing specific HSE, commercial, schedule and execution risks, to prevent contract overrun and overspend due to poor scope definition and creep.
• Identify risks and provide solutions to negate these and provide contractual advice as may be requested from time-to-time ensuring overall cost reduction/saving. Ensure adherence to statutory requirements, including use of all mandated institutions / regulators such as NCMDB, NAFDAC etc, to ensure that only suitably qualified and technically competent national suppliers/ contractors are awarded contracts and purchase orders.
• Influence the selection of various project delivery models throughout the project phases. Support the projects to identify suitable bidders for each proposed tender; Support proposals submissions, bid lists, evaluation methodologies Coordinating pre-bid meetings, site visits and clarification requests. Where necessary liaise with Project Managers and Senior Contracts Engineers as well as Company’s legal, finance and other appropriate functions and provide responses to tenderers’ contractual clarification requests and award strategies to Tender Committees.
• Support the detailed definition, execution and close out of third party spend savings (TPSS), Cost Optimisation Reviews (COR) in the assigned Category, identify supply chain Opportunities proactively with clear demonstrated business case that identifies value and risks and ensure that claims, non-conformances, disputes, variations are eliminated/avoided to maximise value in the business. Maintain a log of all savings generated for own contracts and obtain validation of such savings.
• Provide contract management support to project teams throughout the contract life-cycle. Work with the relevant parties and stakeholders to issue contract documents post award incorporating general and specific terms and conditions as applicable, liaising with legal and functional disciplines to resolve contractual qualifications.
• Guide contract holders as value champions, deliver ‘contract holder’ and related CP capacity development programmes and facilitate regular Contract Holder networking forums to ensure collaboration and knowledge sharing in the business in line with NLNG 10Bs.

Education

• A University Degree preferably in Engineering, Business or Financial Management or any related discipline.
• Membership of The Chartered Institute of Purchasing and Supply (CIPS) UK or Nigeria, or Institute of Supply Management (ISM) US or equivalent at a diploma or certified level is an advantage.

Experience:

• 7 – 10 years post graduate experience with a minimum of 5 years in contracting and procurement roles in a reputable organization (preferably in an industry involving maintenance, shutdowns, projects and facilities management) in an Oil& Gas company.
• Experience in LEAN and in CP SAP module will be added advantage.

 

Job Title: Projects Portfolio Administrator II

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide effective Project Administrative support for the PD CAPEX project portfolio by providing effective information management and compliance with NLNG Project Governance process to contribute to the successful execution of CAPEX projects for the realization of NLNG business objectives.

Main Accountabilities

• Perform quality compliance checks on Project Development Requests (PDR) packages for presentation to the various governance Meetings (Weekly DRB, weekly Project Portfolio and Monthly Project Review Meetings) ensure adequate compliance to submission deadlines for excellence processing of PDR packages.
• Participate in the preparation of the yearly CAPEX budget with 5 years look ahead in line with the Budget preparation procedure and Budget reviews as required.
• Administer project governance processes and procedures including administering meetings for the Governance forums to ensure timely review and approval of Project proposals via the appropriate decision gates thereby ensuring assurance and compliance with the NLNG project management process.
• Manage the archiving and retrieval of hard and soft copy project documentation (SAP, Livelink) to ensure effective Project Information Management systems.
• Continuously update projects information in SAP to ensure the accuracy of data in the PD CAPEX Projects Portfolio is maintained and action SAP requests as required.
• Provide Project Assurance support for the PD CAPEX projects across the three main Portfolios (i.e., Plant, Infrastructure and Pipeline/GTS in contribution to the delivery of projects on time and within Budget.
• Act as Nigerian Content Focal person for ensuring adequate awareness on Nigerian content requirements and tracking Nigerian Content deployment on projects thereby leading to improved compliance with Nigerian content requirements on PD CAPEX projects.
• Prepare periodic Projects reports associated with PD CAPEX projects and issue same within the agreed timelines to ensure continuous control of Projects in alignment with Company’s business objectives.
• Develop and update project management, project controls and reporting procedures as required and ensure compliance with these procedures during project implementation to achieve and sustain effective project governance and control for the PD CAPEX Projects Portfolio.

Job Requirements
Education:

• B.Sc. Degree in an Engineering Discipline.

Experience:

• 3 – 5 years post-graduation experience out of which minimum of 2 years should be in either Project Engineering or Project Assurance/Services function within the oil and gas industry

 

Job Title: Lead Data Engineer

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Supporting Analytics Data architecture, Data Governance, Data Quality Assurance, Modeling, Data Landscape documentation and data pipelines for all data objects supporting Operational Reporting and KPI’s.

Main Accountabilities

• Support in the design, implementation and update of NLNG Data architecture, modeling, and process design for raw data objects, intermediary, aggregate tables across a variety of subject matters and data types.
• This includes Big Data ETL and ELT planning and implementation, and coordination with other NLNG business areas or departments.
• Design, construct, and manage the data lake environment including: Data ingestion, staging, data quality monitoring, and business modelling
• Develop, construct, test and maintain architectures (databases and large-scale processing systems)
• Design, develop and implement technical solutions in SQL environment (databases, SQL, data marts, integrations)
• Develop visual reports in Power BI; Maintain and develop queries and stored procedures using T- SQL and Support data integrations
• Maintaining, securing and protecting first party data and supporting end user consumption for key areas.
• Development of internal tools and procedures to make data more accessible.
• In collaboration with the data analytics & reporting team, manage and support Azure Machine Learning environment.

Job Requirements
Education:

• A University Degree in Computer Sciences or Physical Sciences or Engineering; professional qualifications will be an advantage.

Experience:

• 10 to 12 years post-graduation experience, out of which 7 years should be a similar role within the IT department or Digital function or R&D function of a reputable organization preferably Oil & Gas company.

Competency Requirements:

• Highly skilled in SQL programming in T-SQL building stored procedures and jobs
• Strong functional understanding of Azure Machine Learning
• Ability to manage large volume data integration/ETL; experience with SQL Server Integration
• Services (SSIS) including ability to configure SQL Server agent
• Expertise in identifying and mapping data elements across multiple systems
• Knowledge of Power BI report visualizations, Data Analysis Expressions (DAX), Power Query (M), and Power BI data modeling
• Strong understanding of data integration, quality and validation
• Strong understanding of MDM, Data Warehouse/Data mart and relational database design
• Excellent written and verbal communication skills and able to interact with multiple IT teams and business partners both formally and informally
• Effective time management, ability to multi-task with changing priorities while continuing to provide exceptional client service
• Ability to work in a fast-paced agile environment (tools and processes).

 

Job Title: Projects Portfolio Administrator I

Location: Port Harcourt, Rivers

Job Purpose / Objective

• To provide effective Project Administrative support for the PD CAPEX project portfolio by providing effective information management and compliance with NLNG Project Governance process to contribute to the successful execution of CAPEX projects for the realization of NLNG business objectives.

Main Accountabilities

• Perform quality compliance checks on Project Development Requests (PDR) packages for presentation to the various governance Meetings (Weekly DRB, weekly Project Portfolio and Monthly Project Review Meetings) ensure adequate compliance to submission deadlines for excellence processing of PDR packages.
• Participate in the preparation of the yearly CAPEX budget with 5 years look ahead in line with the Budget preparation procedure and Budget reviews as required.
• Administer project governance processes and procedures including administering meetings for the Governance forums to ensure timely review and approval of Project proposals via the appropriate decision gates thereby ensuring assurance and compliance with the NLNG project management process.
• Manage the archiving and retrieval of hard and soft copy project documentation (SAP, Livelink) to ensure effective Project Information Management systems.
• Continuously update projects information in SAP to ensure the accuracy of data in the PD CAPEX Projects Portfolio is maintained and action SAP requests as required.
• Provide Project Assurance support for the PD CAPEX projects across the three main Portfolios (i.e. Plant, Infrastructure and Pipeline/GTS in contribution to the delivery of projects on time and within Budget.
• Act as Nigerian Content Focal person for ensuring adequate awareness on Nigerian content requirements and tracking Nigerian Content deployment on projects thereby leading to improved compliance with Nigerian content requirements on PD CAPEX projects.
• Prepare periodic Projects reports associated with PD CAPEX projects and issue same within the agreed timelines to ensure continuous control of Projects in alignment with Company’s business objectives.
• Develop and update project management, project controls and reporting procedures as required and ensure compliance with these procedures during project implementation to achieve and sustain effective project governance and control for the PD CAPEX Projects Portfolio.

Job Requirements
Education:

• University Degree in any of the relevant disciplines.

Experience:

• 3 – 5 years post-graduation experience out of which minimum of 2 years should be in either Project Engineering or Project Assurance/Services function within the oil and gas industry.

 

Job Title: Project Material Coordinator

Location: Bonny Island, Rivers

Job Purpose / Objective

• To ensure all project materials are procured, delivered, inspected, stored, preserved, and issued in a safe and efficient manner, meeting HSE, quality, cost, and scheduled targets.

Main Accountabilities

• Coordinate the receipt and issuance of client direct procured materials, required for project construction activities.
• Manage the day-to-day activities of the Project Material Storage Area and ensure strict compliance to CLIENT’S safety and security policies.
• Coordinate site material inspection to ensure all materials are delivered according to purchase order specification and quantity.
• Ensure all project materials (including contractors’ managed stock) are stored and preserved following general storage best practices and OEMs storage guidelines.
• Coordinate material handling and transport of all project materials and ensure availability for pick up and / or delivery to construction site or any other advised location.
• Manage the inventory of all project materials stored in the Project Materials Storage Area and monitor material usage by contractors and ensure all surplus materials are handed over back to client at the end of the construction.
• Support delivery expediting of all clients direct and indirect (contractor) procurement and ensure materials are delivered ahead of their required-on-site (ROS) date.
• Maintain Projects Procurements & Materials Database of all clients’ direct procurement and share periodic reports to the project team.
• Source materials within the Project Materials Storage Area, the client’s Main Warehouse and across all clients’ satellite storage areas, including Contractors’ stock.
• Support project team in planning the disposal of obsolete and decommissioned items according to company procedure and policy.

Job Requirements
Education:

• B.Sc. in Engineering and any related Science discipline.

Experience:

• 5 years post graduate experience out of which at least 3years should have been in materials management work in the Oil and Gas industry.

 

Job Title: Senior Web Developer (Web App / UX Designer Digital)

Location: Port Harcourt, Rivers

Job Objective

• Build the capability needed to collaborate, build, deploy and sustain value effectively in our unique agile culture.
• Envisioning the direction and executing the core user experience (UI and UX) design elements in the digital portfolio.
• Leading delivery of Digital design delivery, design operations and shaping the design culture in the Company.
• Ensure a focus on creating a world-class user experience and apply best in class design principles to realize transformational business value across the global digital portfolio.

Main Accountabilities

• Understands fluently the overall technology portfolio. Collaborates with digital Chief Product Owners, Initiative Product Owners and regional and functional stakeholders to understand their digital product roadmaps and requirements.
• Defines company’s direction for UI and UX and ensures tight integration into the roadmaps to deliver world-class innovative customer-centric user experiences.
• Steers, and is accountable for cross-functional product development teams to build designs that meet requirements – including design specification documents, user flows, wireframes, prototypes, etc.
• Drives company’s end user experience design from an end-to-end perspective, including discovery, ideation, conception, detailed design, prototypes, and validation across multiple products and areas.
• Leads and steers building an enterprise-wide community of practice, providing guidance on UX and UI design to realize the vision. Coach company professionals (non-designers) to deepen understanding of Design Thinking methods and user centred practices.
• Gains support for the UI/UX vision and direction from senior functions, regions, digital and other technical leadership as well as from senior technical experts.
• Provides direction, manages performance, coaches and mentors Lead Designers in providing engaging and intuitive user experiences for digital products
• Oversees and monitors all user research, persona development, usability testing, contextual inquiry, surveys, A/Btesting and task analysis as well as facilitates workshops with senior stakeholders and end users.
• Defines the experience strategy by facilitating work sessions and opportunity workshops with product teams and users to articulate key design goals, plans and requirements
• Audits the landscape competitively and comparatively for inspiration as well as design ideas that can be utilized in the current design process
• Leads and monitors the overall BP user experience and product design efforts for the team, ensuring the delivery of a high-quality service and product development
• Manages interfaces with Upstream Technology Teams, IT&S Teams and external partners and vendors to position
• BP as an informed buyer in the space of digitization.
• Tracking digital and design trends for inspiration as well as design ideas that can improve solutions and working processes
• Collaborates with cross functional teams: Product, Marketing, and Technology leaders to ensure successful development, release, and launch of a best-in-class product
• Ensures high quality graphics and visual components are present and that teams are using the best of resources, tools and capabilities available.

Job Requirements
Education:

• A University Degree in Computer Sciences or Engineering; professional qualifications will be an advantage.

Experience:

• 5 to 7 years post-graduation experience, out of which 3 years should be a similar role within the IT department or Digital function of a reputable organization preferably Oil & Gas company.

Others:

• 3+ years experience in specifying, analyzing and documenting requirements for applications on a large scale.
• Decisiveness, good judgment, analytical/math/strategic aptitude and problem-solving skills to act with authority and take risks in an environment with little direction from others.
• Strong facilitation skills and proven experience at driving consensus across multiple stakeholders.
• Experience using multiple types of requirements tools (i.e. Jira, Blueprint, Jama, Microfocus, or related) and managing the requirements through the SDLC.
• Experience in managing requirements using multiple methodologies (i.e. Agile, waterfall, iterative etc)
• General understanding of application programming, database, and system design is a plus.

 

Job Title: Senior Material Coordinator

Location: Bonny Island, Rivers

Job Purpose / Objective

• Coordinates and ensure effective project material management to support efficient NLNG Projects (Infrastructure, ISB/OSB, Plant and Community) delivery. Develop and maintain an updated database of all project procurement materials as well as procurement activities.
• Develop and implement optimum value warehouse, asset management strategies, policy, procedures and operations for project materials that enable Company safely and reliably fulfil its contractual obligations as well as manage and supervise all warehousing operations, material activities.

Main Accountabilities

• Liaise with Project Portfolio Managers/Engineers and Procurement Specialist to ensure optimum level of materials and plan consumption of stock to ensure cost effective utilization of allocated resources, storage space and given budget.
• Develop, maintain and implement detailed working systems and procedures for carrying out the various warehousing functions to ensure that all activities are carried out safely and in line with industry best practice, company policies and external regulations.
• Develop and implement warehouse utilization and materials storage activities and drive capital and operational warehouse improvement projects to ensure optimization of storage space utilization and stock holding costs.
• Manage processes for material handling, security, validity, preservation and refurbishment / rejuvenation to ensure all stored materials are fit for purpose when required and prevent loss of materials as well as ensure that material received complies with the requirements and report non-conformance on a timely basis and update stock levels upon issue and receipt of materials.
• Coordinate, maintain and implement HSEQ aspect of warehouse operations, safety plans and programs in line with company’s corporate HSEQ policies and coach warehouse personnel to be aware of safety requirements of all warehousing operations to ensure the minimum competency levels are met or exceeded.
• Coordinate and supervise the material receipt processes; to ensure only items that meet the required specification are received for projects and eliminate discrepancies.
• Coordinate and supervise the material issuance process; to maintain a high service delivery level and system data accuracy and ensure there is no disruption of project delivery operations due to delay in materials delivery.
• Liaise with the project engineers, procurement team and vendors to replace rejected materials.
• Provide regular report on material updates to the project team. Send feedback of lessons learned on materials used during construction to the project team, for incorporation into future projects.
• Support project team in planning the disposal of obsolete and decommissioned items according to company procedure and policy.

Education

• A University Degree preferably in Engineering, Business, Financial Management or related discipline.
• Membership of The Chartered Institute of Purchasing and Supply (CIPS) UK or Nigeria, or Institute of Supply Management (ISM) US or equivalent at a diploma or certified level.

Experience:

• 7 – 10 years post graduate experience, out of which 5 years should have been spent in a warehousing or inventory management role in a reputable organization preferably an Oil & Gas company.

 

Job Title: Project Document Coordinator

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Support the Coordination of all technical documents and data across multiple projects and portfolios during its complete lifecycle; Development of routine Reports on Assai Performance; Support the team lead to ensure the identification and timely access to current and accurate documentation to help ensure project actions and decisions impacting Integrity are made using the correct information.

Main Accountabilities

• Support the implementation of effective and efficient work processes and procedures for document/data management. Involve in contractor and supplier engagement to ensure that information management requirements and procedures are understood and applied.
• Support in the definition of asset data requirement, process for submission, validation and feedback to contractors and suppliers and to deliver consistent and complete information for handover to owner/operator.
• Responsible for the completeness and correctness of metadata as part of contractor deliverables, and assurance of the validity of the Master Deliverables Register (MDR) & Asset Information Template (AIT).
• Responsible for managing and improving the numbering process for project documents, including correspondences, and the tracking of same in the necessary databases.
• Responsible for conversion of hard copy documents and records into digital forms.
• Responsible for updating the individual projects folders in Livelink/SharePoint, with emerging documents and records.

Job Requirements
Education:

• HND / B.Sc in Engineering, Sciences or Management.

Experience:

• 3 – 6 years post-graduation experience in document control in an oil and gas company.

 

 

Job Title: Senior Digital Technology Analyst

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Support the process of providing novel technical solutions that meet user needs and improve business performance by assisting with the technical analysis of business requirements, problem solving and troubleshooting as part of a larger project team. Accountable for ensuring that clear, concise requirements have been captured.
• Provide support in developing business cases, budgeting, and department planning activities.

Main Accountabilities

• Support identification of innovative solutions, matching solutions with business needs and proactively identifying capability gaps and proposing potential solutions.
• Supporting the strategic planning process. Periodically, you provide data-driven analyses on strategic topics, actively engaging with colleagues across the company to convert insights to actions, and develop and executive presentation materials that define growth plans
• Support in definition and operational running of the digital strategy unit; e.g. performance reporting, budgeting, and department’s planning.
• Develop Prove of Concepts (PoC) proposals, requirements management plans; including elicitation, approvals, processes, Risks Assumptions Issues Dependencies and scope impacts;
• Shapes and define the business case, producing detailed business justification for investment including return on investment and benefits realization.
• Expand on existing and deliver new innovative technologies (e.g. industry 4.0) that drive insights and empower data-driven decision-making.
• Identify, prototype, and develop novel process/equipment-focused solutions that enable asset health and asset performance.
• Identify Industry technologies (e.g. Industry 4.0) trends and analyze vendors
• Drive the definition, selection, design, and development of intelligent control solutions and cognitive solutions for the optimization of machines and processes.

Job Requirements
Education:

• A University Degree in Computer Sciences or Physical Sciences or Engineering; professional qualifications will be an advantage.

Experience:

• 5 to 7 years post-graduation experience, out of which 3 years should be a similar role within the IT department or Digital function or R&D function of a reputable organization preferably Oil & Gas company.

Competency Requirements:

• Highly skilled in SQL programming in T-SQL building stored procedures and jobs
• Strong functional understanding of Azure Machine Learning
• Ability to manage large volume data integration/ETL; experience with SQL Server Integration
• Services (SSIS) including ability to configure SQL Server agent
• Expertise in identifying and mapping data elements across multiple systems
• Knowledge of Power BI report visualizations, Data Analysis Expressions (DAX), Power Query (M), and Power BI data modeling
• Strong understanding of data integration, quality and validation
• Strong understanding of MDM, Data Warehouse/Data mart and relational database design
• Excellent written and verbal communication skills and able to interact with multiple IT teams and business partners both formally and informally
• Effective time management, ability to multi-task with changing priorities while continuing to provide exceptional client service
• Ability to work in a fast-paced agile environment (tools and processes).

 

Job Title: Quality Inspector – Civil / Structural

Location: Bonny Island, Rivers
Employment Type: Full-time

Job Purpose / Objective

• To perform quality related activities that will support the delivery of Projects in line with Company’s specified project quality requirements through implementation of quality assurance processes, monitoring and control of the project activities for compliance with specifications and plans by both internal and external parties.

Main Accountabilities

• Ensure that the project execution activities are executed in a controlled and assured way to a quality that is consistent with the delivery of the project objectives in terms of meeting HSSE & SP, schedule, cost, quality and other targets (“Doing the Project Right”).
• Ensure that best practices and lessons learned are being applied consistently and appropriately and enabling business targets to be met, with specific emphasis on Top Quartile Project Delivery (TQPD).
• Conduct spot checks at project sites to ascertain compliance with approved work processes, documentation, inspection & test requirements, as prescribed in project Inspection & Test Plans (ITP’s), Quality Control Procedures (QCP’s) and Quality Plan to deliver projects in accordance with contractual quality requirements.
• Confirm quality of all materials on site and ensure compliance to all project specifications.
• Provide QA/QC services to the TP department to support delivery of projects according to plan; prepare and issue required periodic (weekly, monthly, quarterly or as specified) work activity reports.
• Monitor all activities and materials of construction in accordance with the approved drawings and specifications.
• Coordinate with the construction engineers and client inspectors for clearing designated inspections
• Prepare and resolve site work queries with interested parties.
• Raise non-conformance reports for any violation.
• Prepare daily inspection reports on field activities.
• Follow up all quality functions as per approved documented information, inspection and test plan, check list etc.
• Conduct inspection on all materials received at site and ensure materials to be used conforms to project/contract plans and specifications.
• Review detailed inspection and testing procedures for project activities
• Ensure the implementation of approved strategies and procedures across all assigned projects
• Monitor and coordinate interested parties inspectors during inspections
• Monitor Contractors equipment calibration status and preservation methods.

Job Requirements
Education:

• A University degree in Civil / Structural Engineering or its equivalent. Additionally, successfully passed ISO 9001 training. SSPC PCI (Level 1, 2) and ISO Lead Auditor Training are added advantage.

Experience:

• A minimum of 7 years post graduate experience, out of which at least 3 years must have been spent in quality assurance and control in either project engineering/design activities in the Oil and Gas sector.

 

Job Title: Quality Inspector – Electrical & Instrumentation

Location: Bonny Island, Rivers
Employment Type: Full-time

Job Purpose / Objective

• To perform quality related activities that will support the delivery of Projects in line with Company’s specified project quality requirements through implementation of quality assurance processes, monitoring and control of the project activities for compliance with specifications and plans by both internal and external parties.

Main Accountabilities

• Ensure that the project execution activities are executed in a controlled and assured way to a quality that is consistent with the delivery of the project objectives in terms of meeting HSSE & SP, schedule, cost, quality and other targets (“Doing the Project Right”).
• Ensure that best practices and lessons learned are being applied consistently and appropriately and enabling business targets to be met, with specific emphasis on Top Quartile Project Delivery (TQPD).
• Conduct spot checks at project sites to ascertain compliance with approved work processes, documentation, inspection & test requirements, as prescribed in project Inspection & Test Plans (ITP’s), Quality Control Procedures (QCP’s) and Quality Plan to deliver projects in accordance with contractual quality requirements.
• Confirm quality of all materials on site and ensure compliance to all project specifications.
• Provide QA/QC services to the TP department to support delivery of projects according to plan; prepare and issue required periodic (weekly, monthly, quarterly or as specified) work activity reports.
• Monitor all activities and materials of construction in accordance with the approved drawings and specifications.
• Coordinate with the construction engineers and client inspectors for clearing designated inspections
• Prepare and resolve site work queries with interested parties.
• Raise non-conformance reports for any violation.
• Prepare daily inspection reports on-field activities.
• Follow up all quality functions as per approved documented information, inspection and test plan, checklist etc.
• Conduct inspection on all materials received at site and ensure materials to be used conforms to project/contract plans and specifications.
• Review detailed inspection and testing procedures for project activities
• Ensure the implementation of approved strategies and procedures across all assigned projects
• Monitor and coordinate interested parties inspectors during inspections
• Monitor Contractors equipment calibration status and preservation methods.

Job Requirements
Education:

• A University Degree in Electrical / Electronics Engineering or its equivalent.
• Additionally, successfully passed ISO 9001 training. IAEI Certification and ISO Lead Auditor Training are added advantage.

Experience:

• A minimum of 7 years post-graduate experience, out of which at least 3 years must have been spent in quality assurance and control in either project engineering/design activities in the Oil and Gas sector.

 

Job Title: Quality Inspector – Mechanical / Piping

Location: Bonny Island, Rivers
Employment Type: Full-time

Job Purpose / Objective

• To perform quality related activities that will support the delivery of Projects in line with Company’s specified project quality requirements through implementation of quality assurance processes, monitoring and control of the project activities for compliance with specifications and plans by both internal and external parties.

Main Accountabilities

• Ensure that the project execution activities are executed in a controlled and assured way to a quality that is consistent with the delivery of the project objectives in terms of meeting HSSE & SP, schedule, cost, quality and other targets (“Doing the Project Right”).
• Ensure that best practices and lessons learned are being applied consistently and appropriately and enabling business targets to be met, with specific emphasis on Top Quartile Project Delivery (TQPD).
• Conduct spot checks at project sites to ascertain compliance with approved work processes, documentation, inspection & test requirements, as prescribed in project Inspection & Test Plans (ITP’s), Quality Control Procedures (QCP’s) and Quality Plan to deliver projects in accordance with contractual quality requirements.
• Confirm quality of all materials on site and ensure compliance to all project specifications.
• Provide QA/QC services to the TP department to support delivery of projects according to plan; prepare and issue required periodic (weekly, monthly, quarterly or as specified) work activity reports.
• Monitor all activities and materials of construction in accordance with the approved drawings and specifications.
• Coordinate with the construction engineers and client inspectors for clearing designated inspections
• Prepare and resolve site work queries with interested parties.
• Raise non-conformance reports for any violation.
• Prepare daily inspection reports on field activities.
• Follow up all quality functions as per approved documented information, inspection and test plan, check list etc.
• Conduct inspection on all materials received at site and ensure materials to be used conforms to project/contract plans and specifications.
• Review detailed inspection and testing procedures for project activities
• Ensure the implementation of approved strategies and procedures across all assigned projects
• Monitor and coordinate interested parties inspectors during inspections
• Monitor Contractors equipment calibration status and preservation methods.

Job Requirements
Education:

• A University Degree in Mechanical Engineering or its equivalent.
• Additionally, successfully passed ISO 9001 training. CSWIP, CWI/AWS, NDT/ASNT and ISO Lead Auditor Training are added advantage.

Experience:

• A minimum of 7 years post graduate experience, out of which at least 3 years must have been spent in quality assurance and control in either project engineering / design activities in the Oil and Gas sector.

 

Job Title: Data Analytics Developer

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Design, Implement and Manage systems for turning data into high-value, actionable insights through the delivery of state-of-the-art, scalable, enterprise data platforms, data science and analytics solutions for our company through a variety of techniques and technologies, from modelling, forecasting, transforming and enriching the data to presenting the data in a meaningful form.

Main Accountabilities

• Gather reporting and analysis requirements and translate into reporting structures data models, including aggregate tables, relational and dimensional.
• Profile and analyse source data to determine the best reporting structures.
• Design and build data integration processes from internal and external source systems into the
• Enterprise Data Warehouse/Lake.
• Develop dashboards that brings out insight from data for data across the organisation
• Develop and implement quality controls and departmental standards to ensure quality standards, organizational expectations, and regulatory requirements.
• Manage and optimize processes for data intake, validation, mining and engineering as well as modelling, visualization and communication deliverables.
• Develop use cases and data visualizations. Deliver value to the business from data analysis and document, catalogue, profile, cleanse and audit the data.
• Build, develop and maintain data models, reporting systems, data automation systems, dashboards and performance metrics support that support key business decisions.
• Lead cross-functional initiatives using advanced data modelling and analysis techniques to discover insights that will guide strategic decisions and uncover optimization opportunities.
• Provides business and technical expertise for the analytics process, tools, and applications for a business function or business unit.

Job Requirements
Education:

• A University Degree in Computer Sciences or Physical Sciences or Engineering; professional qualifications will be an advantage.

Experience:

• 5 to 7 years post-graduation experience, out of which 3 years should be a similar role within the IT department or Digital function or R&D function of a reputable organization preferably Oil & Gas company.

Competency Requirements:

• Highly skilled in SQL programming in T-SQL building stored procedures and jobs
• Strong functional understanding of Azure Machine Learning
• Ability to manage large volume data integration/ETL; experience with SQL Server Integration
• Services (SSIS) including ability to configure SQL Server agent
• Expertise in identifying and mapping data elements across multiple systems
• Knowledge of Power BI report visualizations, Data Analysis Expressions (DAX), Power Query (M), and Power BI data modeling
• Strong understanding of data integration, quality and validation
• Strong understanding of MDM, Data Warehouse/Data mart and relational database design
• Excellent written and verbal communication skills and able to interact with multiple IT teams and business partners both formally and informally
• Effective time management, ability to multi-task with changing priorities while continuing to provide exceptional client service
• Ability to work in a fast-paced agile environment (tools and processes).

 

Job Title: CAD Designer – Electrical / Instrumentation

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The CAD Designer supports the Lead and Design Engineers in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• The CAD Designer is ultimately responsible for engineering drafting and modelling of designs within the team and ensures that the engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering CAE (computer aided engineering)/CAD (computer aided design) applications for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects execution
• Responsible for Company asset 2D/3D/4D modelling and consistency checks in projects
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Work closely with Lead and Senior Design Engineers to resolve any existing or forecasted problems related to drafting quality in design or productivity. Carry out consistency checks on drawings, models etc.
• Apply Company specifications and design manuals in line with the PMF/DCAF to deliver project intents in engineering deliverables CAD and modelling.
• Ensure all engineering discipline requirements and CAD inputs are made into Project documents such as BfD, BDP, BDEP, PES, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects.
• Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate drafting reviews and assurance on projects.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• HND / B.Sc or equivalent in any Engineering discipline preferably Electrical Engineering.

Experience:

• Minimum of 5 years’ experience in CAD and design works for the oil and gas industry, Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.

 

 

Job Title: Senior Data Analytics Developer

Location: Port Harcourt, Rivers

Job Purpose / Objective

• Design, Implement and Manage systems for turning data into high-value, actionable insights through the delivery of state-of-the-art, scalable, enterprise data platforms, data science and analytics solutions for our company through a variety of techniques and technologies, from modelling, forecasting, transforming and enriching the data to presenting the data in a meaningful form.

Main Accountabilities

• Gather reporting and analysis requirements and translate into reporting structures data models, including aggregate tables, relational and dimensional.
• Profile and analyse source data to determine the best reporting structures.
• Design and build data integration processes from internal and external source systems into the
• Enterprise Data Warehouse/Lake.
• Develop dashboards that brings out insight from data for data across the organisation
• Develop and implement quality controls and departmental standards to ensure quality standards, organizational expectations, and regulatory requirements.
• Manage and optimize processes for data intake, validation, mining and engineering as well as modelling, visualization and communication deliverables.
• Develop use cases and data visualizations. Deliver value to the business from data analysis and document, catalogue, profile, cleanse and audit the data.
• Build, develop and maintain data models, reporting systems, data automation systems, dashboards and performance metrics support that support key business decisions.
• Lead cross-functional initiatives using advanced data modelling and analysis techniques to discover insights that will guide strategic decisions and uncover optimization opportunities.
• Provides business and technical expertise for the analytics process, tools, and applications for a business function or business unit.

Job Requirements
Education:

• A University Degree in Computer Sciences or Physical Sciences or Engineering; professional qualifications will be an advantage.

Experience:

• 7 to 10 years post-graduation experience, out of which 5 years should be a similar role within the IT department or Digital function or R&D function of a reputable organization preferably Oil & Gas company.

Competency Requirements:

• Highly skilled in SQL programming in T-SQL building stored procedures and jobs
• Strong functional understanding of Azure Machine Learning
• Ability to manage large volume data integration/ETL; experience with SQL Server Integration
• Services (SSIS) including ability to configure SQL Server agent
• Expertise in identifying and mapping data elements across multiple systems
• Knowledge of Power BI report visualizations, Data Analysis Expressions (DAX), Power Query (M), and Power BI data modeling
• Strong understanding of data integration, quality and validation
• Strong understanding of MDM, Data Warehouse/Data mart and relational database design
• Excellent written and verbal communication skills and able to interact with multiple IT teams and business partners both formally and informally
• Effective time management, ability to multi-task with changing priorities while continuing to provide exceptional client service
• Ability to work in a fast-paced agile environment (tools and processes).

Job Title: Document Controller I

Location: Port Harcourt, Rivers

Job Objectives

• To ensure client’s documents and drawings are handled, issued and stored in a secured and efficient way and in accordance with the requirements of SAIM Module of Gas-GAME.

Duties & Responsibilities

• Receive, register and verify the quality of data about documents, including data about relations to facility components and other objects.
• Keep Document Master List up-to-date.
• Support checking of the suitability of electronic documents for storing in PACER.
• Managing, monitoring and controlling of all client Documents.
• Ensure that latest versions of documents are clearly identifiable and that only latest versions of documents are available to users.
• Maintain and file (where necessary) hard copies of documents and replace outdated hard copy documents with latest updates.
• Provide input to planning of document management activities.
• Ensure that the documents are stored and integrated in the Facility Information Model and also ensure easy retrieval of the Document from client EDMS (PACER)
• Provide input to proposals for creation, review and update of procedures for registration and control of documents.
• Produce and distribute hard copies of documents as and when required by third parties. Facilitate document exchange with Engineering Service Contractors.
• Ensure that the integrity and confidentiality of relevant documentation is carefully controlled,
• Guide users on the correct usage of PACER.
• Maintain adequate stock levels of office supplies for all TEA personnel as well as for the Document Control Office reproduction equipment.

Job Requirements
Education:

• HND/B.Sc in any discipline, preferably Engineering or Science disciplines.

Experience:

• 6 years post graduate experience, out of which 3 years should have been spent in a Document Control unit in the Oil & Gas sector.

 

Job Title: CAD Designer – Mechanical / Piping

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The CAD Designer supports the Lead and Design Engineers in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• The CAD Designer is ultimately responsible for engineering drafting and modelling of designs within the team and ensures that the engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering CAE (computer aided engineering)/CAD (computer aided design) applications for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects execution
• Responsible for Company asset 2D/3D/4D modelling and consistency checks in projects
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Work closely with Lead and Senior Design Engineers to resolve any existing or forecasted problems related to drafting quality in design or productivity. Carry out consistency checks on drawings, models etc.
• Apply Company specifications and design manuals in line with the PMF/DCAF to deliver project intents in engineering deliverables CAD and modelling.
• Ensure all engineering discipline requirements and CAD inputs are made into Project documents such as BfD, BDP, BDEP, PES, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects.
• Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate drafting reviews and assurance on projects.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation.

Job Requirements
Education:

• HND / B.Sc or equivalent in any Engineering discipline preferably Mechanical Engineering.

Experience:

• Minimum of 5 years’ experience in CAD and design works for the oil and gas industry,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

 

Job Title: CAD Designer – Civil / Structural

Location: Port Harcourt, Rivers

Job Purpose / Objective

• The CAD Designer supports the Lead and Design Engineers in the Project Delivery Organisation in ensuring effective coordination and delivery of design and engineering work for capital projects.
• The CAD Designer is ultimately responsible for engineering drafting and modelling of designs within the team and ensures that the engineering design for assigned capital project is carried out safely to applicable codes and standards utilizing industry best practices to achieve error free and on-schedule project delivery.

Main Accountabilities

• Responsible for delivering CAE (computer aided engineering)/CAD (computer aided design) applications for projects, as appropriate for each phase, in line with the corporate goal of competitive and affordable projects execution
• Responsible for Company asset 2D/3D/4D modelling and consistency checks in projects
• Perform the role of Discipline Q-Captain to ensure Flawless Project Delivery
• Work closely with Lead and Senior Design Engineers to resolve any existing or forecasted problems related to drafting quality in design or productivity. Carry out consistency checks on drawings, models etc.
• Apply Company specifications and design manuals in line with the PMF/DCAF to deliver project intents in engineering deliverables CAD and modelling.
• Ensure all engineering discipline requirements and CAD inputs are made into Project documents such as BfD, BDP, BDEP, PES, ITT, etc, in close coordination with other technical disciplines to ensure an integrated delivery.
• Act as technical expert on projects within the project’s organization and responsible for the relevant discipline deliverables plan for projects.
• Liaise with the Corporate Engineering and other SMEs/TA to provide appropriate drafting reviews and assurance on projects.
• Provide visible and personal leadership in HSSE to drive Goal Zero from design through construction and operation

Job Requirements
Education:

• HND / B.Sc or equivalent in any Engineering discipline preferably Civil / Structural Engineering.

Experience:

• Minimum of 5 years’ experience in CAD and design works for the oil and gas industry,
• Experience shall include computer use of Microsoft Office as well as CAD specific software (AutoCAD, GTXRaster CAD, MicroStation, etc.).

How to Apply
Interested and qualified candidates should:
Click here to apply

Note

• The Curriculum Vitae must be properly titled and uploaded (e.g CV_Data Analyst_Chukwu Abiola Ahmed)
• Relevant Credentials, Professional and membership Certificates, where applicable, must be uploaded as a single PDF file
• Application for more than 2 positions will be automatically disqualified.
• Only applications received via the IESL online portal shall be considered.
• Only Shortlisted Candidates will be contacted.
• Any false information provided during or after the application process will lead to outright disqualification of such candidate(s).
• If you have any challenge with the application portal, please email: recruitment@ieslglobal.com for support only

Application Deadline 27th January, 2022.